The ABC130 barrel module prototyping programme for the ATLAS strip tracker

0535660 - FZÚ 2021 RIV GB eng J - Článek v odborném periodiku
Poley, L. - Sawyer, C. - Addepalli, S. - Kroll, Jiří - Mikeštíková, Marcela … celkem 249 autorů
The ABC130 barrel module prototyping programme for the ATLAS strip tracker.
Journal of Instrumentation. Roč. 15, č. 9 (2020), s. 1-79, č. článku P09004. ISSN 1748-0221. E-ISSN 1748-0221
Grant CEP: GA MŠMT(CZ) LM2018104
Institucionální podpora: RVO:68378271
Klíčová slova: detector design and construction technologies and materials * Si microstrip and pad detectors * radiation-hard detectors * front-end electronics for detector readout
Obor OECD: Particles and field physics
Impakt faktor: 1.415, rok: 2020
Způsob publikování: Open access

For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100% silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototyping programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-250) and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototyping program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests.

Trvalý link: http://hdl.handle.net/11104/0313616