INFLUENCE OF THERMOMECHANICAL TREATMENT ON THE GRAIN-GROWTH BEHAVIOUR OF NEW Fe-Al BASED ALLOYS WITH FINE Al2O3 PRECIPITATES

0506693 - ÚFM 2020 RIV SI eng J - Článek v odborném periodiku
Mašek, B. - Khalaj, O. - Jirková, H. - Svoboda, Jiří - Bublikova, D.
INFLUENCE OF THERMOMECHANICAL TREATMENT ON THE GRAIN-GROWTH BEHAVIOUR OF NEW Fe-Al BASED ALLOYS WITH FINE Al2O3 PRECIPITATES.
Materiali in Tehnologije. Roč. 51, č. 5 (2017), s. 759-768. ISSN 1580-2949. E-ISSN 1580-3414
Grant CEP: GA ČR(CZ) GA14-24252S
Institucionální podpora: RVO:68081723
Klíčová slova: ods * microstructure * oxidation * grain growth * ODS alloys * steel * Fe-Al * Al2O3
Obor OECD: Thermodynamics
Impakt faktor: 0.590, rok: 2017
Způsob publikování: Open access
http://mit.imt.si/Revija/izvodi/mit175/masek.pdf

To obtain the superior-high-temperature creep strength, a transformation of a fine-grained structure to large grains due to abnormal grain growth or recrystallization is an important process in oxide-dispersion-strengthened (ODS) alloys. The processing of steel is enabled with powder metallurgy, which utilizes powders consisting of a Fe-Al metal matrix with a large O content, prepared with mechanical alloying, and their hot consolidation due to rolling. The thermomechanical characteristics of new ODS alloys with a Fe-Al matrix are investigated in terms of the changes in the grain-size distribution. The recrystallization and grain growth were quantified after heating up to 1200 degrees C, which is the typical consolidation temperature for standard nanostructured ferritic steels. The results show that new ODS alloys are significantly affected by the thermomechanical treatment leading to microstructural changes. Recrystallization is mostly affected by decreasing the deformation and increasing the holding time, which leads to a growth of the grain size.
Trvalý link: http://hdl.handle.net/11104/0300366