Thermo-mechanical Processing of EZK Alloys in a Synchrotron Radiation Beam

0504481 - ÚJF 2020 RIV CH eng C - Konferenční příspěvek (zahraniční konf.)
Tolnai, D. - Dupont, M. -A. - Gavras, S. - Máthis, K. - Fekete-Horváth, Klaudia - Stark, A. - Schell, N.
Thermo-mechanical Processing of EZK Alloys in a Synchrotron Radiation Beam.
THE MINERALS, METALS AND MATERIALS SERIES. Vol. 2019. Cham: Springer, 2019, s. 297-303. ISBN 978-3-030-05788-6. ISSN 2367-1181.
[Magnesium Technology Symposium 2019. San Antonio (US), 10.03.2019-14.03.2019]
Grant CEP: GA ČR GB14-36566G; GA MŠMT EF16_013/0001794
Institucionální podpora: RVO:61389005
Klíčová slova: elevated temperature compression * in situ synchrotron radiation diffraction * intermetallic phases
Obor OECD: Condensed matter physics (including formerly solid state physics, supercond.)

Nd, a rare earth element with low solid solubility in Mg, is an ideal alloying element to improve elevated temperature yield strength and creep resistance cost effectively. The addition of Zn leads to further improvement in the elevated temperature properties. Therefore, Mg-Nd-Zn alloys are prospective materials for structural and medical applications. In situ synchrotron radiation diffraction was performed during compression at 200 and 350 ℃ for Mg3NdxZn (x = 0, 0.5, 1, 2 wt%) alloys up to a deformation of 0.3 with a deformation rate of 10 -3 s -1 . The compressed samples were subsequently subjected to electron backscattered diffraction. The results show that at 200A ℃ the addition of Zn increased the ductility. At the beginning of plastic deformation twinning was the dominant deformation mechanism complemented by sub-grain formation at a later stage. At 350A ℃, the compression strength was increased with the addition of Zn and the microstructure of the samples underwent partial dynamic recrystallization during compression.
Trvalý link: http://hdl.handle.net/11104/0296102