Effect of Thermomechanical Treatment on Subsequent Deformation Behavior in a Binary Z1 Magnesium Alloy Studied by the Acoustic Emission Technique

0504278 - ÚJF 2020 RIV DE eng J - Článek v odborném periodiku
Drozdenko, D. - Bohlen, J. - Fekete-Horváth, Klaudia - Yi, Sb. - Letzig, D. - Chmelík, F. - Dobroň, P.
Effect of Thermomechanical Treatment on Subsequent Deformation Behavior in a Binary Z1 Magnesium Alloy Studied by the Acoustic Emission Technique.
Advanced Engineering Materials. Roč. 21, č. 3 (2019), č. článku 1800915. ISSN 1438-1656. E-ISSN 1527-2648
Grant CEP: GA MŠMT EF16_013/0001794
Institucionální podpora: RVO:61389005
Klíčová slova: acoustic emissions * magnesium * segregation * thermomechanical treatment * twinning
Obor OECD: Condensed matter physics (including formerly solid state physics, supercond.)
Impakt faktor: 3.217, rok: 2019
Způsob publikování: Omezený přístup
https://doi.org/10.1002/adem.201800915

Pre-straining of magnesium alloy modifies the final texture of the material and therefore leads to a different deformation behavior during subsequent loading. At the same time, heat treatment in the context of thermo-mechanical procedures is used as softening mechanism, as well as for age hardening processing. In mechanical conditions with twin-dominated deformation in textured magnesium alloys, the twin boundaries can be pinned if existing after a pre-deformation of samples and therefore influence their mobility. The impact of the ongoing mechanical behavior is discussed. In the present paper, a procedure of pre-compression and reverse tensile loading of extruded binary magnesium alloy Mg-1wt% Zn (Z1) is used and intermediate aging at 200 degrees C is applied in two different routes. The effect of the heat treatment on the flow behavior during subsequent mechanical loading is correlated with the dominating deformation mechanisms revealed by in situ acoustic emission measurements and ex situ scanning electron microscopy. The pinning of twin boundaries can restrict their mobility in experimental environments that favor the recovery of the samples. As a result, new twins easily nucleate if the concurrent re-orientation of the lattice is favorable for strain accommodation.
Trvalý link: http://hdl.handle.net/11104/0295945