0503886 - ÚGN 2020 RIV CZ eng J - Článek v odborném periodiku
Vavro, Leona - Malíková, L. - Frantík, P. - Kubeš, P. - Keršner, Z. - Vavro, Martin
An advanced assessment of mechanical fracture parameters of sandstones depending on the internal rock texture features.
Acta geodynamica et geomaterialia. Roč. 16, č. 2 (2019), s. 157-168. ISSN 1214-9705. E-ISSN 2336-4351
Grant CEP: GA MŠMT(CZ) LO1406
Institucionální podpora: RVO:68145535
Klíčová slova: sandstone * mode I fracture toughness * bending Young's modulus * fracture energy * load–displacement diagram
Obor OECD: Mechanical engineering
Impakt faktor: 1.227, rok: 2019
Způsob publikování: Open access
Web výsledku:
https://www.irsm.cas.cz/materialy/acta_content/2019_doi/Vavro_AGG_2019_0013.pdf
DOI: https://doi.org/10.13168/AGG.2019.0013

In this paper, sandstones from three Czech localities were subjected to mechanical fracture testsin order to obtain their properties. Carboniferous sandstone from the Staříč site was primarilydifferent from the two other Cretaceous sandstones from Podhorní Újezd and Javorka localitiesin the type of grain contact, as well as in their mineralogical composition of the rock matrix andcement. These differences were primarily reflected in different rock porosities. An advancedassessment of the fracture response of the chevron notch specimens made of sandstonessubjected to three-point bending test was carried out by means of the GTDiPS programsuggested for processing the loading diagrams. Bending Young's modulus, mode I fracturetoughness and fracture energy were subsequently calculated for all tested sandstone samples.Obtained outcomes show that the sandstone from the Staříč mine exhibits several times highervalues of investigated properties than the Podhorní Újezd and Javorka sandstones. This wasa result of a higher degree of rock compaction, siliciferous rock cement and, therefore, relativelylow total porosity. Internal rock texture and mineralogical composition of matrix or cement arethus one of the most important factors influencing the values of mechanical fracture parametersof sandstones.

Trvalý link: http://hdl.handle.net/11104/0295655