Počet záznamů: 1
Anion exchange membranes and binders based on polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene copolymer for alkaline water electrolysis
- 1.0502436 - ÚMCH 2020 RIV US eng J - Článek v odborném periodiku
Žitka, Jan - Peter, Jakub - Galajdová, Barbora - Pavlovec, Lukáš - Pientka, Zbyněk - Paidar, M. - Hnát, J. - Bouzek, K.
Anion exchange membranes and binders based on polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene copolymer for alkaline water electrolysis.
Desalination and Water Treatment. Roč. 142, February (2019), s. 90-97. ISSN 1944-3994. E-ISSN 1944-3986
Grant CEP: GA ČR(CZ) GA16-20728S
Institucionální podpora: RVO:61389013
Klíčová slova: polystyrene block copolymer * alkaline water electrolysis * anion exchange membrane
Obor OECD: Electrochemistry (dry cells, batteries, fuel cells, corrosion metals, electrolysis)
Impakt faktor: 0.854, rok: 2019
Způsob publikování: Omezený přístup
https://www.deswater.com/DWT_abstracts/vol_142/142_2019_90.pdf
The preparation of hydroxide ion-conductive membranes and catalyst binders starting from polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (PSEBS) is described. Highly chloromethylated (CM) and soluble polymer was obtained by the reaction of PSEBS with dimethoxymethane (formaldehyde precursor), ZnCl2 (catalyst), and phosphorus trichloride (chlorinating agent). The prepared CM polymer was used for casting of membranes and preparation of binders of catalytic particles. The membranes and binders were converted into quaternized form (PSEBS-CM-trimethylamine (TMA)) by immersion into an ethanolic solution of TMA. Ionic conductivity of PSEBS-CM-TMA was 56.1 mS cm(-1) at 30 degrees C and 79.2 mS cm(-1) at 70 degrees C, respectively. A laboratory water electrolyzer using a PSEBS-CM-TMA membrane and an anode with PSEBS-CM-TMA binder was operated permanently for 1 month without considerable deterioration of its performance. The anodes containing PSEBS-CM-TMA binder and NiCo2O4 catalyst greatly outperformed those containing the same amount of NiCo2O4 fixed to the anode by polytetrafluoroethylene.
Trvalý link: http://hdl.handle.net/11104/0294407
Počet záznamů: 1