Steam Plasma Methane Reforming for Hydrogen Production

0498171 - ÚFP 2019 RIV US eng J - Článek v odborném periodiku
Hrabovský, Milan - Hlína, Michal - Kopecký, Vladimír - Mašláni, Alan - Křenek, Petr - Serov, Anton - Hurba, Oleksiy
Steam Plasma Methane Reforming for Hydrogen Production.
Plasma Chemistry and Plasma Processing. Roč. 38, č. 4 (2018), s. 743-758. ISSN 0272-4324. E-ISSN 1572-8986
Grant CEP: GA ČR(CZ) GA15-19444S; GA ČR(CZ) GC17-10246J
Institucionální podpora: RVO:61389021
Klíčová slova: thermal plasma * steam plasma * methane reforming * hydrogens * syngas
Obor OECD: Fluids and plasma physics (including surface physics)
Impakt faktor: 2.768, rok: 2018
https://link.springer.com/article/10.1007%2Fs11090-018-9891-5

Reactions of methane with water and CO2 in thermal plasma generated in a special plasma torch with a water-stabilized arc were investigated. Steam plasma with very high enthalpy and low mass flow rate was produced in a dc arc discharge which was in direct contact with water vortex surrounding the arc column. Composition of produced gas, energy balance of the process and its efficiency were determined from measured data. The output H-2/CO ratio could be adjusted by a choice of feed rates of input reactants in the range 1.1-3.4. Depending on experimental conditions the conversion of methane was up to 99.5%, the selectivity of H-2 was up to 99.9%, and minimum energy needed for production of 1 mol of hydrogen was 158 kJ/mol. Effect of conditions on process characteristics was studied. Comparison of measured data with results of theoretical computations confirmed that the reforming process produces gas with composition which is close to the one obtained from the thermodynamic equilibrium calculations. Relations between process enthalpy, composition of produced syngas and process characteristics were determined both theoretically and experimentally.
Trvalý link: http://hdl.handle.net/11104/0290570