Evaluating the toughness of APS and HVOF-sprayed Al2O3-ZrO2-coatings by in-situ- and macroscopic bending

0489513 - ÚFP 2019 RIV GB eng J - Článek v odborném periodiku
Kiilakoski, J. - Mušálek, Radek - Lukáč, František - Koivuluoto, H. - Vuoristo, P.
Evaluating the toughness of APS and HVOF-sprayed Al2O3-ZrO2-coatings by in-situ- and macroscopic bending.
Journal of the European Ceramic Society. Roč. 38, č. 4 (2018), s. 1908-1918. ISSN 0955-2219. E-ISSN 1873-619X
Grant CEP: GA ČR GB14-36566G
Institucionální podpora: RVO:61389021
Klíčová slova: Thermal spray * Al2O3-ZrO2 * Toughening * Fracture * Mechanical testing
Obor OECD: Coating and films
Impakt faktor: 4.029, rok: 2018
https://www.sciencedirect.com/science/article/pii/S0955221917308051

Thermally-sprayed ceramic coatings are commonly used in applications where high wear and corrosion resistance are essential. However, their inherently low toughness and resistance to impacts often limit their use. In bulk ceramics, the toughening effect of ZrO2 has been successfully implemented in different compositions of Al2O3-ZrO2. Successful toughening leads to increased wear resistance and higher reliability. In this study, APS-and HVOF-sprayed Al2O3-40ZrO(2) coatings were characterized with SEM and XRD techniques. The toughness of the coatings was evaluated by measuring their strain tolerance with in-situ (SEM) three-point-bending and macroscopic four-point bending with acoustic emission instrumentation. The APS-coatings had a higher strain to-fracture but failed abruptly. In HVOF-coatings, the cracking commenced earlier but proceeded slower with more crack deflections. The observed behaviour is likely to derive from the coarser microstructure of the APS-coatings, which allows strain distribution in a larger area unlike the finer structure with a lesser melting degree of the HVOF-coatings.
Trvalý link: http://hdl.handle.net/11104/0283914