Počet záznamů: 1  

Assessment of deformation characteristics on CW004A copper influenced by acoustically enhanced water jet

  1. 1.
    0488500 - ÚGN 2019 RIV DE eng C - Konferenční příspěvek (zahraniční konf.)
    Lehocká, Dominika - Simkulet, V. - Legutko, S.
    Assessment of deformation characteristics on CW004A copper influenced by acoustically enhanced water jet.
    Advances in Manufacturing. Vol. 201519. Cham: Springer, 2018 - (Hamrol, A.; Ciszak, O.; Legutko, S.), s. 717-724. Lecture Notes in Mechanical Engineering, 201519. ISBN 978-3-319-68618-9.
    [MANUFACTURING 2017 - International Scientific-Technical Conference on Advances in Manufacturing /5./. Poznaň (PL), 24.10.2017-27.10.2017]
    Grant CEP: GA MŠMT(CZ) LO1406
    Institucionální podpora: RVO:68145535
    Klíčová slova: copper * microhardness * water jet technology
    Obor OECD: Mechanical engineering
    https://link.springer.com/chapter/10.1007%2F978-3-319-68619-6_69

    Paper deals with copper CW004A deformation characteristics evaluation after pulsating water jet disintegration. Experimental samples were prepared from copper CW004A with marking A, B, and C. As variable factors were selected combinations of pressure of pump pressure and nozzle diameter: A (p, =, 65, MPa, d, =, 1.067, mm), B (p, =, 49, MPa, d, =, 1.321, mm), C (p, =, 38, MPa, d, =, 1.600, mm). Surface topography was evaluated using optical profilometry. Microhardness measurement was measured using Vickers indenter. Hardness measurement was performed on seventeen points under disintegrated area in distance from 0.1 to 3, mm. Measured values indicate slight increase of strain hardening undercutting area.
    Trvalý link: http://hdl.handle.net/11104/0283089

     
    Název souboruStaženoVelikostKomentářVerzePřístup
    UGN_0488500.doc32.3 MBAutorský preprintpovolen
     
Počet záznamů: 1  

  Tyto stránky využívají soubory cookies, které usnadňují jejich prohlížení. Další informace o tom jak používáme cookies.