Preparation and properties of plasma sprayed NiAl10 and NiAl40 coatings on AZ91 substrate.

0474381 - ÚFP 2018 RIV CH eng J - Článek v odborném periodiku
Kubatík, Tomáš František - Lukáč, František - Stoulil, J. - Ctibor, Pavel - Průša, F. - Stehlíková, K.
Preparation and properties of plasma sprayed NiAl10 and NiAl40 coatings on AZ91 substrate.
Surface and Coatings Technology. Roč. 319, June (2017), s. 145-154. ISSN 0257-8972
Grant CEP: GA ČR(CZ) GP14-31538P
Institucionální podpora: RVO:61389021
Klíčová slova: Nickel aluminide * AZ91 magnesium alloy * Plasma spraying * Potentiodynamic measurement * Adhesion strength
Obor OECD: Materials engineering
Impakt faktor: 2.906, rok: 2017
http://www.sciencedirect.com/science/article/pii/S0257897217303250

Magnesium alloys are, due to high specific strength and stiffness, materials suitable for lightweight applications in automotive and aeronautical industries. Very poor corrosion resistance of magnesium and magnesium alloys significantly limits their wide utilization. Magnesium alloys are very susceptible to galvanic corrosion that can result in serious pitting corrosion, particularly in wet and salty environment. Magnesium and its alloys can be
protected by formation of protective surface layerswhich can be achieved by plasma spraying capable of preparing metal and/or ceramic coatings. In this work, plasma coatings of NiAl10 and NiAl40 on AZ91 magnesium alloy substrate were prepared by the hybrid plasma spraying system WSP®-H 500. Present results show a significant effect of the preheat temperature of the AZ91 substrate during plasma spraying on development of a diffusion
bonding due to the formation of sub-layer composed of Mg3AlNi2, Al12Mg17 phases and of Mg and Al solid solutions. The plasma sprayed coatings were observed by scanning electron microscope with elements point analysis and by X-ray phase analysis. The mechanical properties of prepared coatings were evaluated by adhesion tests.
The corrosion resistance of prepared coatingswas evaluated using themethod of potentiodynamicmeasurements performed in the 0.5mol·l-1NaCl solutionwhile the long-termcorrosion resistancewas assessed in condensation chamber in wet air atmosphere at the temperature of 35 °C. Both the tests showed significant effect of present sub-layers on resulting corrosion resistance
Trvalý link: http://hdl.handle.net/11104/0271475