Non-destructive evaluation of milled surfaces of a hard bearing steel by the Barkhausen noise technique

0465125 - FZÚ 2017 RIV NL eng C - Konferenční příspěvek (zahraniční konf.)
Stupakov, Alexandr - Neslušan, M. - Uchimoto, T. - Takagi, T.
Non-destructive evaluation of milled surfaces of a hard bearing steel by the Barkhausen noise technique.
Electromagnetic Nondestructive Evaluation (XIX), vol. 41. Amsterdam: IOS Press, 2016 - (Yusa, N.; Uchimoto, T.; Kikuchi, H.), s. 102-109. Studies in Applied Electromagnetics and Mechanics. ISBN 978-1-61499-638-5. ISSN 1383-7281.
[International Workshop on Electromagnetic Non-Destructive Evaluation (ENDE) /20./. Sendai (JP), 21.09.2015-23.09.2015]
Grant CEP: GA ČR GA13-18993S
Institucionální podpora: RVO:68378271
Klíčová slova: Barkhausen noise * field measurement * hard turning * surface integrity
Kód oboru RIV: JB - Senzory, čidla, měření a regulace

A bearing steel of a 62 HRC hardness was milled using the cutting tools with different flank wears. The low-frequency measurements of the magnetic Barkhausen noise were performed under a controllable waveform of the surface magnetic field measured by the Hall sensors. The high-frequency measurements with a smaller magnetization depth were performed by a commercial Rollscan device. The measurements were conducted in two perpendicular magnetization directions: along the feeding and the rotation directions of the cutting shaft. Suitable magnetic parameters for detection of the induced surface damage were proposed.

Trvalý link: http://hdl.handle.net/11104/0263829