Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures

0464779 - ÚFM 2017 RIV GB eng J - Článek v odborném periodiku
Otto, F. - Dlouhý, Antonín - Pradeep, K. G. - Kuběnová, Monika - Raabe, D. - Eggeler, G. - George, E. P.
Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures.
Acta Materialia. Roč. 112, JUN (2016), s. 40-52. ISSN 1359-6454. E-ISSN 1873-2453
Grant CEP: GA ČR(CZ) GA14-22834S
Institucionální podpora: RVO:68081723
Klíčová slova: High-entropy alloy * Phase stability * Solid solution * Aging * Phase transformations
Kód oboru RIV: JG - Hutnictví, kovové materiály
Impakt faktor: 5.301, rok: 2016

Among the vast number of multi-principal-element alloys that are referred to as high-entropy alloys (HEAs) in the literature, only a limited number solidify as single-phase solid solutions. The equiatomic HEA, CrMnFeCoNi, is a face-centered cubic (FCC) prototype of this class and has attracted much attention recently because of its interesting mechanical properties. Here we evaluate its phase stability after very long anneals of 500 days at 500-900 degrees C during which it is reasonable to expect thermodynamic equilibrium to have been established. Microstructural analyses were performed using complementary analysis techniques including scanning and transmission electron microscopy (SEM/TEM/STEM), energy dispersive X-ray (EDX) spectroscopy, selected area electron diffraction (SAD), and atom probe tomography (APT). We show that the alloy is a single-phase solid solution after homogenization for 2 days at 1200 degrees C and remains in this state after a subsequent anneal at 900 degrees C for 500 days. However, it is unstable and forms second-phase precipitates at 700 and 500 degrees C. A Cr-rich sigma phase 'forms at 700 degrees C, whereas three different phases (L1(0)-NiMn, B2-FeCo and a Cr-rich body-centered cubic, BCC, phase) precipitate at 500 degrees C. These precipitates are located mostly at grain boundaries, but also form at intragranular inclusions/pores, indicative of heterogeneous nucleation. Since there is limited entropic stabilization of the solid solution state even in the extensively investigated CrMnFeCoNi alloy, the stability of other HEAs currently thought to be solid solutions should be carefully evaluated, especially if they are being considered for applications in vulnerable temperature ranges.
Trvalý link: http://hdl.handle.net/11104/0263562