Air and silica core Bragg fibers for radiation delivery in the wavelength range 0.6-1.5 μm

0460276 - ÚFE 2017 RIV US eng J - Článek v odborném periodiku
Frank, M. - Jelínek, M. - Kubeček, V. - Kašík, Ivan - Podrazký, Ondřej - Matějec, Vlastimil
Air and silica core Bragg fibers for radiation delivery in the wavelength range 0.6-1.5 μm.
Optical Fiber Technology. Roč. 31, September (2016), s. 36-41. ISSN 1068-5200. E-ISSN 1095-9912
Grant CEP: GA ČR GAP102/12/2361; GA ČR GA16-10019S
Institucionální podpora: RVO:67985882
Klíčová slova: Bragg fiber * Silica core * Laser power
Kód oboru RIV: JA - Elektronika a optoelektronika, elektrotechnika
Impakt faktor: 1.678, rok: 2016

This paper presents fundamental characteristics of laboratory designed and fabricated Bragg fibers with air and silica cores at wavelengths of 632, 975, 1064 and 1550 nm. Fibers with the 26-μm-silica core and 5- or 73-μm-air cores in diameters and claddings of 3 pairs of Bragg layers were prepared from one preform. The overall transmittance, attenuation coefficients, coupling losses, bending losses, and damage-intensity thresholds were determined using four continuous-wave laser sources with the maximum output power of 300 mW and a pulsed 9 ns laser with the maximum output energy up to 1 mJ. The lowest attenuation coefficient of about 70 dB/km was determined at 1064 nm with the 73-μm-air-core Bragg fiber. All fibers have been found to exhibit negligible bending losses down to the bending diameters of 5 cm. In comparison with the conventional gradient optical fiber, all the prepared Bragg fibers have approximately six times higher damage intensity threshold of about 30 GWcm-2 and therefore they are very suitable for high power laser radiation delivery
Trvalý link: http://hdl.handle.net/11104/0260396