Sandstone Turning by Abrasive Waterjet

0452159 - ÚGN 2016 RIV AT eng J - Článek v odborném periodiku
Hlaváček, Petr - Cárach, J. - Hloch, Sergej - Vasilko, K. - Klichová, Dagmar - Klich, Jiří - Lehocká, D.
Sandstone Turning by Abrasive Waterjet.
Rock Mechanics and Rock Engineering. Roč. 48, č. 6 (2015), s. 2489-2493. ISSN 0723-2632. E-ISSN 1434-453X
Grant CEP: GA MŠMT ED2.1.00/03.0082; GA MŠMT(CZ) LO1406
Institucionální podpora: RVO:68145535
Klíčová slova: turning away from the jet * conventional turning towards the jet * sandstone * abrasive water jet
Kód oboru RIV: JQ - Strojní zařízení a nástroje
Impakt faktor: 2.386, rok: 2015
http://www.springerprofessional.de/sandstone-turning-by-abrasive-waterjet/6038028.html

The machining of materials with specific mechanical properties causes problems in terms of the required quality, economic efficiency, and overall effectiveness of the process. A number of works have been published which indicate that the subjects of interest are still important (Kro´lczyk et al. 2013). The machining of the aforementioned materials based on conventional methods does not always meet the requirements of eco-friendly technology nor the efficiency potential of the technological device and tool (Vasilko and Strojny´ 1967; Kro´lczyk et al. 2014). The abrasive waterjet (AWJ) represents a suitable technological method that has specific benefits resulting from the nature of the tool. Many scientific reports have been written about using the water jet and the AWJ for cutting (Summers 1972; Ciccu and Grosso 2014), drilling (Teale 1965), turning (Sitek 2009; Sitek 2005, 2011), and for the purposes of underground mining (Summers 1992; Sharma et al. 2011). The AWJ can be used for the creation of rotating symmetric parts from rocks by turning. The production of parts using standard methods is very complicated and even impossible for some rock materials due to their properties (Summers 1972; Agus et al. 1993; Aydin et al. 2013).
Trvalý link: http://hdl.handle.net/11104/0253180