Hydro-abrasive machining of rotating workpieces from graphite and aluminium alloy

0450579 - ÚGN 2016 RIV CZ eng C - Konferenční příspěvek (zahraniční konf.)
Cárach, J. - Hloch, Sergej - Klich, Jiří - Hlaváček, Petr - Klichová, Dagmar
Hydro-abrasive machining of rotating workpieces from graphite and aluminium alloy.
Vodní paprsek 2015 - výzkum, vývoj, aplikace. Ostrava: Ústav geoniky AV ČR, v.v.i, 2015 - (Sitek, L.; Klichová, D.), s. 13-22. ISBN 978-80-86407-56-2.
[Vodní paprsek 2015 - výzkum, vývoj, aplikace. Velké Losiny (CZ), 06.10.2015-08.10.2015]
Grant CEP: GA MŠMT ED2.1.00/03.0082; GA MŠMT(CZ) LO1406
Institucionální podpora: RVO:68145535
Klíčová slova: abrasive water jet * machining * roughness parameters
Kód oboru RIV: JQ - Strojní zařízení a nástroje

The paper compares the quality of machined surface of graphite and aluminium alloy by abrasive water jet using the focusing tube with a diameter of df1 = 0.5 mm and df2 = 0.78 mm. The machining was carried out using the technology of rotating workpiece disintegration by abrasive water jet. Abrasive tangential water jet was used to carry out the experiment (water pressure p = 400 MPa). Workpieces were clamped in the rotating chucking appliance with rotation frequency n = 300 min-1. The change in focusing tube diameter caused the change in values of roughness parameters, and also caused the change of resulting shape of workpieces. Values of roughness parameters were measured using the MicroProf FRT optic profilometer.
Trvalý link: http://hdl.handle.net/11104/0251859