The effect of carbon additions on creep of Fe-25 Al-5 Zr alloy

0448442 - ÚFM 2016 RIV CZ eng A - Abstrakt
Dobeš, Ferdinand - Vodičková, V. - Kejzlar, P.
The effect of carbon additions on creep of Fe-25 Al-5 Zr alloy.
Book of Abstracts. 17th International Conference on the Strength of Materials (ICSMA-17). Brno: Ústav fyziky materiálů AV ČR, v. v. i., 2015 - (Dlouhý, A.; Kunz, L.). s. 321-321. ISBN 978-80-87434-07-9.
[ICSMA-17 International Conference on the Strength of Materials /17./. 09.08.2015-14.08.2015, Brno]
Grant CEP: GA ČR(CZ) GAP108/12/1452
Institucionální podpora: RVO:68081723
Klíčová slova: compressive creep * iron aluminides * carbides
Kód oboru RIV: JG - Hutnictví, kovové materiály

Compressive creep of alloys based on Fe-25 at. % Al-5 at. % Zr with different carbon additions (0.06, 1 and 4 at. %) was studied at temperatures from 700 to 900 °C. Stress exponents and activation energies were estimated. Comparison of the data indicates that the strengthening by the Laves phase particles is more effective at larger stresses whereas carbides are probably more important at low strain rates at the temperature of 900 °C. Carbon additions deteriorate creep resistance at the temperature of 700 °C. This result is discussed in terms of the ratio of zirconium to carbon in the alloy. An increase of the creep resistance with increasing ratio Zr:C from 0.8 to 2 is in agreement with the behaviour observed previously in alloys with substantially lower concentrations of zirconium and carbon.
Trvalý link: http://hdl.handle.net/11104/0250265