Počet záznamů: 1
Structure and mechanical properties of Al-Si-Fe alloys prepared by short-term mechanical alloying and Spark Plasma Sintering
- 1.0444289 - ÚFP 2016 RIV GB eng J - Článek v odborném periodiku
Průša, J. - Vojtěch, D. - Bláhová, M. - Michalcová, A. - Kubatík, Tomáš František - Čížek, J.
Structure and mechanical properties of Al-Si-Fe alloys prepared by short-term mechanical alloying and Spark Plasma Sintering.
Materials & Design. Roč. 75, June (2015), s. 65-75. ISSN 0261-3069
Institucionální podpora: RVO:61389021
Klíčová slova: Aluminium alloys * Mechanical Properties * Microstructure * Mechanical alloying * Spark-Plasma Sintering
Kód oboru RIV: JG - Hutnictví, kovové materiály
Impakt faktor: 3.997, rok: 2015
http://www.sciencedirect.com/science/article/pii/S0261306915000990#
Al–10Si–21Fe and Al–20Si–16Fe (wt.%) alloys were prepared by mechanical alloying and subsequent compaction via SPS technology. A heat-treated and artificially aged casting Al–12Si–1Cu–1Mg–1Ni (wt.%) alloy, generally considered to be thermally stable, was used as a reference material. The ultrafine-grained microstructure of compact alloys resulted in excellent mechanical properties, e.g., hardness and compressive strength. Furthermore, the Al–10Si–21Fe alloy exhibited an unexpected yield drop when compressive tested at elevated temperatures. Both tested alloys exhibited high initial hardness reaching almost 400 HV5, exceeding the hardness of the reference alloy by nearly a factor of four. Additionally, even when annealed at 400 °C for 100 h, the change in hardness was negligible. Furthermore, the compact Al–10Si–21Fe and Al–20Si–16Fe alloys exhibited compressive strengths of 1033 MPa and 758 MPa, respectively. The casting alloy exhibited low mechanical properties compared to those of
Trvalý link: http://hdl.handle.net/11104/0246840
Počet záznamů: 1