Počet záznamů: 1
Mechanical properties of partially pyrolysed composites with plain weave basalt fibre reinforcement
- 1.0434944 - ÚSMH 2015 RIV GB eng J - Článek v odborném periodiku
Černý, Martin - Halasová, Martina - Schweigstillová, Jana - Chlup, Zdeněk - Sucharda, Zbyněk - Glogar, Petr - Svítilová, Jaroslava - Strachota, Adam - Rýglová, Šárka
Mechanical properties of partially pyrolysed composites with plain weave basalt fibre reinforcement.
Ceramics International. Roč. 40, č. 5 (2014), s. 7507-7521. ISSN 0272-8842. E-ISSN 1873-3956
Grant CEP: GA ČR GAP107/12/2445
Institucionální podpora: RVO:67985891 ; RVO:68081723 ; RVO:61389013
Klíčová slova: mechanical properties * ceramic-matrix composites * fracture toughness * heat treatment
Kód oboru RIV: JI - Kompozitní materiály
Impakt faktor: 2.605, rok: 2014
The process of partial pyrolysis was used in the manufacture of composite materials with improved thermal resistance. As reinforcement, basalt plain weave fabric was employed. For the production of the investigated composites, two variants of the matrix precursor polymethylsiloxane or polymethylphenylsiloxane resins - were used. In order to find favourable mechanical properties of the developed materials, several pyrolysis processes differing in the achieved maximum temperature were tested. Flexural strength, Young's modulus, shear modulus, fracture toughness, the temperature dependence of Young's modulus and of creep were measured. The microstructure of the composites was studied by light microscopy and by SEM. The composite with methyphenylsiloxane precursor exhibits favourable mechanical properties after final pyrolysis temperatures in the range of 650-750 degrees C. In the case of the composite with polymethylsiloxane matrix precursor, the best mechanical properties were achieved by pyrolysis terminated at 650 degrees C.
Trvalý link: http://hdl.handle.net/11104/0238964
Počet záznamů: 1