Počet záznamů: 1
Measurement of Temperature in the Steam Arcjet During Plasma Arc Cutting
- 1.0392554 - ÚFP 2014 RIV US eng J - Článek v odborném periodiku
Mašláni, Alan - Sember, Viktor - Stehrer, T. - Pauser, H.
Measurement of Temperature in the Steam Arcjet During Plasma Arc Cutting.
Plasma Chemistry and Plasma Processing. Roč. 33, č. 3 (2013), s. 593-604. ISSN 0272-4324. E-ISSN 1572-8986
Grant CEP: GA ČR GAP205/11/2070
Institucionální podpora: RVO:61389021
Klíčová slova: Plasma arc cutting * Optical emission spectroscopy * Plasma temperature * Steam torch
Kód oboru RIV: BL - Fyzika plazmatu a výboje v plynech
Impakt faktor: 1.599, rok: 2013
http://link.springer.com/content/pdf/10.1007%2Fs11090-013-9443-y.pdf
Spectroscopic measurements were performed by observing the plasma inside the kerf during cutting of stainless steel using direct current electric arc. Experiments were carried out on the plasma torch operated with the plasma gas composed of the vaporized mixture of water and ethanol; arc current was 60 A and cutting speed 30 cm/min. Emission spectral lines of neutral iron were used to experimental evaluation of the temperature of plasma in the kerf and close under the cut plate. Complicated nature of the plasma inside the kerf, including presence of metallic vapours and departures from equilibrium, was taken into account. Hence relatively reliable results were obtained, from which it was possible to get insight into the energy balance and cutting performance of the torch. Temperature of the plasma in the kerf was substantially lower than at the nozzle exit of the torch; however the temperature drop along the kerf was small.
Trvalý link: http://hdl.handle.net/11104/0221374
Počet záznamů: 1