Graphite and LiCo1/3Mn1/3Ni1/3O2 electrodes with piperidinium ionic liquid and lithium bis(fluorosulfonyl)imide for Li-ion batteries

0382056 - ÚACH 2013 RIV CH eng J - Článek v odborném periodiku
Reiter, Jakub - Nádherná, M. - Dominko, R.
Graphite and LiCo1/3Mn1/3Ni1/3O2 electrodes with piperidinium ionic liquid and lithium bis(fluorosulfonyl)imide for Li-ion batteries.
Journal of Power Sources. Roč. 205, MAY (2012), s. 402-407. ISSN 0378-7753. E-ISSN 1873-2755
Grant CEP: GA MŠMT LC523; GA AV ČR(CZ) KJB200320801; GA AV ČR(CZ) KJB200320901
Výzkumný záměr: CEZ:AV0Z40320502
Klíčová slova: QUATERNARY AMMONIUM CATION * ROOM-TEMPERATURE * ELECTROCHEMICAL PROPERTIES * SALT ELECTROLYTES * LI/LICOO2 CELL
Kód oboru RIV: CG - Elektrochemie
Impakt faktor: 4.675, rok: 2012

A new ionic liquid-based electrolyte for lithium batteries operating at an elevated temperature of 55 degrees C was prepared by combining N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide (PP13TFSI) and lithium bis(fluorosulfonyl)imide (LiFSI). The electrolyte does not contain volatile organic components and is thermally stable (up to 285 degrees C) and ionically conductive (2.6 mS cm(-1) at 55 degrees C). The 0.7m LiFSI-PP13TFSI electrolyte has been shown to work effectively with a graphite anode due to the ability of the FSI anions to create a stable solid electrolyte interface on graphite. A discharge capacity of 340-345 mAh g(-1) was achieved at C/10 rate with a coulombic efficiency of 97-98%. The electrolyte is also compatible with LiCo1/3Mn1/3Ni1/3O2 (NMC) cathode material. At the C/10 rate, we achieved a discharge capacity of 160 mAh g(-1). The coulombic efficiency remains high above 99%.
Trvalý link: http://hdl.handle.net/11104/0216167