Počet záznamů: 1
Measurement of flat samples with rough surfaces by Magnetic Adaptive Testing
- 1.0377636 - FZÚ 2013 RIV US eng J - Článek v odborném periodiku
Tomáš, Ivan - Kadlecová, Jana - Vértesy, G.
Measurement of flat samples with rough surfaces by Magnetic Adaptive Testing.
IEEE Transactions on Magnetics. Roč. 48, č. 4 (2012), s. 1441-1444. ISSN 0018-9464. E-ISSN 1941-0069.
[Conference on Soft Magnetic Materials (SMM20) /20./. Kos Island, 18.09.2011-22.09.2011]
Grant CEP: GA ČR GA101/09/1323
Výzkumný záměr: CEZ:AV0Z10100520
Klíčová slova: magnetic contact * magnetic adaptive testing * magnetically open samples * magnetic NDE
Kód oboru RIV: BM - Fyzika pevných látek a magnetismus
Impakt faktor: 1.422, rok: 2012
Magnetic non-destructive tests of structural degradation of ferromagnetic construction materials must be often carried out on flat samples whose magnetic circuit is artificially closed by an attached soft magnetic yoke. Quality of magnetic contact between the sample surface and faces of the yoke has a strong influence on the measured signal and especially with unpolished surfaces it is difficult to be reproduced. The presented experiment suggests a partial solution of the problem via application of non-magnetic spaces inserted between the sample and the yoke. As the goal of the nondestructive tests is not absolute measurement of magnetic parameters of the material, but relative comparison of some convenient magnetic features, which relate to degradation of microstructure of the sample, application of the spacers proves to be not only acceptable, but it is very helpful.
Trvalý link: http://hdl.handle.net/11104/0209741
Počet záznamů: 1