Počet záznamů: 1
Development of manufacturing process of conductive carbon nanotube network/polystyrene composites
- 1.0348093 - ÚH 2011 CH eng C - Konferenční příspěvek (zahraniční konf.)
Říha, Pavel - Slobodian, P. - Olejník, R. - Petráš, D. - Sáha, P.
Development of manufacturing process of conductive carbon nanotube network/polystyrene composites.
Proceedings of the Tenth International Conference on Flow Processes in Composite Materials. Monte Verità: Centro Stefano Franscini, 2010, s. 42. ISBN N.
[FPCM-10: International Conference on Flow Processes in Composite Materials /10./. Monte Verità, Ascona (CH), 11.07.2010-15.07.2010]
Grant CEP: GA AV ČR IAA200600803
Grant ostatní: GA MPO(CZ) 2A-1TP1/068
Výzkumný záměr: CEZ:AV0Z20600510
Klíčová slova: carbon nanotube network * non-woven PS membrane * electric resistance * stress sensor
Kód oboru RIV: BK - Mechanika tekutin
The composite consisting of filter-supported entangled multiwall carbon nanotube networks were prepared by filtration of nanotube fluid dispersion through a non-woven flexible polystyrene membrane. The nanotubes infiltrate partly into the membrane pores and couple the membrane and the accumulated filtrate layer. The filter-support increases nanotube network mechanical integrity and eliminates the laborious process of peeling off the nanotube network from the usual micro-porous (polycarbonate, nylon) membrane filter followed by the network impregnation to increase its compactness. The composite with embedded nanotube network is shown to be a conductor whose electrical resistance is sensitive to compressive strain. To model the electrical resistance strain dependence, the statistical approach based on Weibull distribution of resistive nanotube contacts is used.
Trvalý link: http://hdl.handle.net/11104/0188709
Název souboru Staženo Velikost Komentář Verze Přístup Riha_Slobodian_Olejnik_Petras_Saha_Development of manufacturing_FPCM10.pdf 0 104.9 KB Vydavatelský postprint vyžádat
Počet záznamů: 1