Počet záznamů: 1
Mechanical properties of a-C, SiC and Ti-C:H films
- 1.0323167 - FZÚ 2009 RIV DE eng J - Článek v odborném periodiku
Čtvrtlík, Radim - Stranyánek, Martin - Boháč, Petr - Kulykovskyy, Valeriy - Suchánek, J.
Mechanical properties of a-C, SiC and Ti-C:H films.
[Mechanické vlastnosti tenkých vrstev a-C, SiC a Ti-C:H.]
International Journal of Materials Research. Roč. 99, č. 8 (2008), s. 871-875. ISSN 1862-5282. E-ISSN 2195-8556
Grant CEP: GA MŠMT OC 097; GA AV ČR KJB201240701
Výzkumný záměr: CEZ:AV0Z10100522
Klíčová slova: diamond-like carbon * nanoindentation * coating/substrate system
Kód oboru RIV: BM - Fyzika pevných látek a magnetismus
Impakt faktor: 0.819, rok: 2008
a-C, a-SiC and Ti-C:H coatings were deposited on two steel substrates with different hardness by magnetron sputtering. Their mechanical properties were investigated by depth sensing indentation and dry sliding testing. Load–displacement curves were obtained using a NanoTest NT600 instrument equipped with a Berkovich indenter. The depth profiles of the mechanical properties (indentation hardness H, effective modulus Eeff, and also H/Eeff and H3/Eeff2 ratios) on both substrates are presented. The goal of this article is to compare the dependence of the real response of a coating/substrate system on the substrate. Regardless of substrate type the highest and the lowest values of hardness and modulus belong to a-C and Ti-C:H films, respectively.
Příspěvek se zabývá zkoumáním mechanických vlastností tenkých vrstev a-C, a-SiC a Ti-C:H deponovaných technologií magnetronového naprašování. Vrstvy byly deponovány na dva ocelové substráty s odlišnou tvrdostí. Nanoindentační zkouška byla provedena na přístroji Nanotest NT600 s kalibrovaným indentorem typu Berkovič, pro výzkum tribologických vlastností byl použit HEF tribometr. Ve článku jsou prezentovány hloubkové profily mechanických vlastností vrstev (indetační tvrdost H, efektivní modul Eeff, podíly H/Eeff and H3/Eeff2 a koeficient tření) na obou substrátech. Cílem je srovnat reálnou odezvu systému vrstva/substrát. Bez ohledu na typ substrátu vykazují nejvyšší hodnoty tvrdosti a modulu vrstvy a-C.
Trvalý link: http://hdl.handle.net/11104/0171213
Počet záznamů: 1