Počet záznamů: 1  

Hardness and elastic modulus of amorphous and nanocrystalline SiC and Si films

  1. 1.
    0307730 - FZÚ 2008 RIV CH eng J - Článek v odborném periodiku
    Kulykovskyy, Valeriy - Vorlíček, Vladimír - Boháč, Petr - Stranyánek, Martin - Čtvrtlík, Radim - Kurdyumov, A. - Jastrabík, Lubomír
    Hardness and elastic modulus of amorphous and nanocrystalline SiC and Si films.
    [Tvrdost a modul pružnosti amorfních a nanokrystalických filmů SiC a Si.]
    Surface and Coatings Technology. Roč. 202, - (2008), s. 1738-1745. ISSN 0257-8972
    Grant CEP: GA MŠMT OC 097; GA MŠMT OC 095; GA MŠMT(CZ) 1M06002
    Výzkumný záměr: CEZ:AV0Z10100522
    Klíčová slova: sputtering * hardness * nanocrystalline SiC films * nanocomposites * amorphous
    Kód oboru RIV: BM - Fyzika pevných látek a magnetismus
    Impakt faktor: 1.860, rok: 2008

    Hydrogen-free amorphous and nanocrystalline films were prepared by magnetron sputtering of the SiC or Si targets. Mechanical properties (hardness, elastic modulus, intrinsic stress) and film structures were investigated in dependence on the substrate bias and temperature. It was found that both hardness and elastic modulus of all amorphous a-SiC films prepared at different substrate temperatures and biases are always lower than those for bulk α-SiC single crystal while the hardness of partially crystalline SiC films is higher and the elastic modulus lower than those for α-SiC one. In contrast, both hardness and elastic modulus of all amorphous Si films are always lower than those for nanocrystalline Si films which show approximately the same value as the Si single crystal.

    Vodíkuprosté amorfní a nanokrystalické filmy byly připraveny magnetronovým rozprašováním Targetů SiC a Si. V závislosti na "bias" a teplotě substrátů byly zkoumány jejich mechanické vlastnosti (tvrdost, modul pružnosti, vnitřní pnutí). Bylo zjištěno, že tvrdost a modul pružnosti všech amorfních a-SiC filmů byl menší než pro "bulk" α-SiC monokrystalu. Částečně krystalické filmy SiC měly vyšší tvrdost a nižší modul pružnosti než α-SiC. Naproti tomu amorfní filmy Si měly všechny tvrdost a modul pružnosti nižší než Si filmy nanokrystalické, které vykázaly přibližně tytéž hodnoty jako monokrystal Si.
    Trvalý link: http://hdl.handle.net/11104/0160406

     
     
Počet záznamů: 1  

  Tyto stránky využívají soubory cookies, které usnadňují jejich prohlížení. Další informace o tom jak používáme cookies.