Počet záznamů: 1  

Evolution of fine microstructure during firing of extruded clays: a small angle neutron scattering study

  1. 1.
    0493146 - UTAM-F 2019 RIV NL eng J - Článek v odborném periodiku
    Viani, Alberto - Ševčík, Radek - Appavou, M.-S. - Radulescu, A.
    Evolution of fine microstructure during firing of extruded clays: a small angle neutron scattering study.
    Applied Clay Science. Roč. 166, December (2018), s. 1-8. ISSN 0169-1317
    Grant CEP: GA MŠk(CZ) LO1219
    Klíčová slova: fired-clays * small angle neutron scattering * extrusion * anisotropy * porosity
    Kód oboru RIV: JH - Keramika, žáruvzdorné materiály a skla
    Obor OECD: Ceramics
    Impakt faktor: 3.890, rok: 2018
    https://doi.org/10.1016/j.clay.2018.09.002

    The microstructure of extruded fired-clay bodies in the interval 800–1100 °C has been investigated with small angle neutron scattering. The evolution of the retrieved pore size distribution is compatible with the coarsening of the pore network with increasing temperature. The analysis of the scattering curves in combination with results of electron microscopy, indicated a multiscale nature for the pore-matrix microstructure. A structural parameter obtained from the analysis of the scattering curves, is proposed as indicator of maximum firing temperature through the implementation of a linear calibration curve. Such method has been successfully tested on a material of industrial production and can be considered of interest for the production of custom made replacement materials in the conservation of cultural heritage or for the characterization of the manufacturing process of archaeological fired-clay objects. Textural features originated by the forming process of extrusion have been detected as anisotropy of the pore network. They are still present above 1000 °C and, because of the use of screw extrusion, they are observed in both sections cut parallel and perpendicular to the direction of extrusion.
    Trvalý link: http://hdl.handle.net/11104/0286572