Počet záznamů: 1

Control of tin oxide film morphology by addition of hydrocarbons to the chemical vapour deposition process

  1. 1.
    0355506 - FZU-D 2011 RIV CH eng J - Článek v odborném periodiku
    Yates, H.M. - Evans, P. - Sheel, D.W. - Remeš, Zdeněk - Vaněček, Milan
    Control of tin oxide film morphology by addition of hydrocarbons to the chemical vapour deposition process.
    Thin Solid Films. Roč. 519, č. 4 (2010), s. 1334-1340 ISSN 0040-6090
    GRANT EU: European Commission(XE) 214134 - N2P; European Commission(XE) 38885 - SE-POWERFOIL
    Výzkumný záměr: CEZ:AV0Z10100521
    Klíčová slova: alcohol * chemical vapour deposition * morphology * tin oxide
    Kód oboru RIV: BM - Fyzika pevných látek a magnetismus
    Impakt faktor: 1.909, rok: 2010

    In this paper we have shown that it is possible to modify and control the surface morphology of doped SnO2 transparent conducting oxide thin films deposited by atmospheric pressure chemical vapour deposition by use of additives during the deposition process. A range of volatile organic compounds were explored, which caused changes of differing magnitude to the growth rates, crystallographic preferences, size and shape of the surface features and optical transmittance. Of the additives tested methanol and tertiary butanol were found to have the most significant influence allowing the surface to be modified from small, round features to much more elongated, sharp, pyramidal features.
    Trvalý link: http://hdl.handle.net/11104/0194258