Počet záznamů: 1

Influence of Pores and Cracks Morphology on Mechanical Behavior of Thermally Sprayed Ceramics

  1. 1.
    0347289 - UFP-V 2011 RIV DE eng C - Konferenční příspěvek (zahraniční konf.)
    Mušálek, Radek - Matějíček, Jiří - Pejchal, V. - Mari, E. - Valarezo, A. - Sampath, S.
    Influence of Pores and Cracks Morphology on Mechanical Behavior of Thermally Sprayed Ceramics.
    ITSC 2010 – International Thermal Spray Conference & Exposition: Conference Proceedings. Düsseldorf: DVS Media GmbH, 2010, s. 723-728. ITSC. ISBN 978-3-87155-590-9.
    [ITSC 2010 – International Thermal Spray Conference & Exposition. Singapore (SG), 03.05.2010-05.05.2010]
    Grant CEP: GA MŠk ME 901
    Výzkumný záměr: CEZ:AV0Z20430508
    Klíčová slova: APS coatings * HVOF and laser glazed coatings * influence of spray parameters * ceramic oxide layers * stiffness * fatigue and fracture
    Kód oboru RIV: JI - Kompozitní materiály

    Pores and cracks have significant influence on the structural rigidity and mechanical behavior of the thermally sprayed materials. For some applications dense coatings are needed, while for others (e.g. thermal barriers) some level of porosity is desirable. Recent development in thermal spraying focuses on the tailored design of pores and cracks for specific applications. In this project, ceramic coatings with different level and morphology of pores and cracks were plasma and HVOF sprayed on titanium alloy substrates. Coating microstructures were observed using scanning electron microscopy. Mechanical behavior of the prepared coatings was evaluated using four-point bending test in terms of changing coating stiffness with increasing mechanical load both in compression and tension. Significant level of coating nonlinearity and hysteresis were observed. Tests carried out for coatings with the same chemical composition but different microstructure proved strong dependency.
    Trvalý link: http://hdl.handle.net/11104/0188096