Search results
- 1.0571995 - ÚT 2024 RIV NL eng J - Journal Article
Gabrisch, H. - Janovská, Michaela - Rackel, M.W. - Pyczak, F. - Stark, A.
Impact of microstructure on elastic properties in the alloy Ti-42Al-8.5 Nb.
Journal of Alloys and Compounds. Roč. 932, January (2023), č. článku 167578. ISSN 0925-8388. E-ISSN 1873-4669
R&D Projects: GA ČR(CZ) GA20-12624S
Institutional support: RVO:61388998
Keywords : γ-TiAl * Nb * elastic properties * transmission electron microscopy * resonant ultrasound spectroscopy
OECD category: Materials engineering
Impact factor: 6.2, year: 2022
Method of publishing: Limited access
https://www.sciencedirect.com/science/article/pii/S092583882203969X
Permanent Link: https://hdl.handle.net/11104/0342847 - 2.0561578 - ÚFM 2023 RIV GB eng J - Journal Article
Abdoshahi, N. - Dehghani, M. - Ruban, A. V. - Friák, Martin - Šob, Mojmír - Spitaler, J. - Holec, D.
On the energetics of the cubic‐to‐hexagonal transformations in TiAl+Mo alloys.
Acta Materialia. Roč. 240, NOV (2022), č. článku 118268. ISSN 1359-6454. E-ISSN 1873-2453
Institutional support: RVO:68081723
Keywords : Density functional theory * TiAl * Martensitic transformations * Diffusionless transformations
OECD category: Condensed matter physics (including formerly solid state physics, supercond.)
Impact factor: 9.4, year: 2022
Method of publishing: Open access
https://www.sciencedirect.com/science/article/pii/S1359645422006486?via%3Dihub
Permanent Link: https://hdl.handle.net/11104/0334355 - 3.0542932 - ÚFM 2022 RIV GB eng J - Journal Article
Vinogradov, A. - Heczko, Milan - Mazánová, Veronika - Linderov, M. - Kruml, Tomáš
Kinetics of cyclically-induced mechanical twinning in γ-TiAl unveiled by a combination of acoustic emission, neutron diffraction and electron microscopy.
Acta Materialia. Roč. 212, JUN (2021), č. článku 116921. ISSN 1359-6454. E-ISSN 1873-2453
R&D Projects: GA MŠMT(CZ) LQ1601; GA MŠMT(CZ) EF16_025/0007304
Institutional support: RVO:68081723
Keywords : Acoustic emission * Cyclic deformation * Dislocation slip * Microscopy * Neutron diffraction * TiAl alloy * Twinning
OECD category: Materials engineering
Impact factor: 9.209, year: 2021
Method of publishing: Limited access
https://www.sciencedirect.com/science/article/pii/S1359645421003013?via%3Dihub
Permanent Link: http://hdl.handle.net/11104/0320812 - 4.0524225 - ÚFM 2021 RIV CH eng J - Journal Article
Chlupová, Alice - Heczko, Milan - Obrtlík, Karel - Dlouhý, Antonín - Kruml, Tomáš
Effect of heat-treatment on the microstructure and fatigue properties of lamellar γ-TiAl alloyed with Nb, Mo and/or C.
Materials Science and Engineering A Structural Materials Properties Microstructure and Processing. Roč. 786, JUN (2020), č. článku 139427. ISSN 0921-5093. E-ISSN 1873-4936
R&D Projects: GA MŠMT(CZ) LQ1601
Institutional support: RVO:68081723
Keywords : TiAl alloys * Heat treatment * Microstructure * Mechanical properties * Fatigue
OECD category: Materials engineering
Impact factor: 5.234, year: 2020
Method of publishing: Limited access
https://doi.org/10.1016/j.msea.2020.139427
Permanent Link: http://hdl.handle.net/11104/0309678 - 5.0509810 - ÚFM 2024 RIV CH eng C - Conference Paper (international conference)
Hasegawa, M. - Hirata, K. - Dlouhý, Ivo
Microstructural change and fracture behavior under different heat exposure conditions on thermal barrier coatings deposited on tiAl intermetallic compound.
New Methods of Damage and Failure Analysis of Structural Parts. Zurich: Trans Tech Publication, 2019 - (Strnadel, B.), s. 27-33. Key Engineering Materials, 810. ISBN 978-3-0357-1447-0. ISSN 1013-9826.
[New Methods of Damage and Failure Analysis of Structural Parts. Ostrava (CZ), 10.09.2018-14.09.2018]
Institutional support: RVO:68081723
Keywords : TiAl intermetallic compound * thermal barrier coatings * heat exposure
OECD category: Materials engineering
https://www.scientific.net/KEM.810.27
Permanent Link: http://hdl.handle.net/11104/0301471 - 6.0509804 - ÚFM 2024 RIV CH eng C - Conference Paper (international conference)
Hasegawa, M. - Tomohiro, I. - Dlouhý, Ivo
Effect of heat treatment at (β+γ) two phase region on fracture toughness in tiAl intermetallic compound.
New Methods of Damage and Failure Analysis of Structural Parts. Zurich: Trans Tech Publication, 2019 - (Strnadel, B.), s. 21-26. Key Engineering Materials, 810. ISBN 978-3-0357-1447-0. ISSN 1013-9826.
[New Methods of Damage and Failure Analysis of Structural Parts. Ostrava (CZ), 10.09.2018-14.09.2018]
Institutional support: RVO:68081723
Keywords : TiAl intermetallic compound * β phase precipitation * fully lamellar * fracture toughness
OECD category: Materials engineering
https://www.scientific.net/KEM.810.21
Permanent Link: http://hdl.handle.net/11104/0301470 - 7.0494647 - ÚFM 2019 RIV CH eng J - Journal Article
Hasegawa, M. - Sakurai, K. - Stratil, Luděk - Dlouhý, Ivo - Fukutomi, H.
Fracture toughness of a lamellar orientation-controlled TiAl-based alloy processed by either one-step or two-step compression at high temperature.
Materials Science and Engineering A Structural Materials Properties Microstructure and Processing. Roč. 721, APR (2018), s. 303-310. ISSN 0921-5093. E-ISSN 1873-4936
Institutional support: RVO:68081723
Keywords : TiAl alloy * Dynamic recrystallization * Fully lamellar * Lamellae orientation control * Fracture toughness
OECD category: Materials engineering
Impact factor: 4.081, year: 2018
Permanent Link: http://hdl.handle.net/11104/0287772 - 8.0481140 - ÚFM 2018 RIV CH eng C - Conference Paper (international conference)
Sakurai, K. - Hasegawa, M. - Dlouhý, Ivo
Fracture Toughness of Massively Transformed and Subsequently Heat Treated TiAl Intermetallic Compound.
Analysis of Damage Features and Failures for Structural Materials and Parts. Zürich: Trans Tech Publications Ltd, 2017 - (Strnadel, B.), s. 25-30. Key Engineering Materials, 741. ISBN 978-3-0357-1127-1. ISSN 1013-9826.
[2016 - International Workshop on New Methods of Damage and Failure Analysis of Structural Parts /7./. Yokohama (JP), 01.11.2016-04.11.2016]
Institutional support: RVO:68081723
Keywords : TiAl intermetallic compound * Massive transformation * Fracture toughness
OECD category: Materials engineering
Permanent Link: http://hdl.handle.net/11104/0276749 - 9.0480159 - ÚFM 2018 RIV CH eng C - Conference Paper (international conference)
Chlupová, Alice - Heczko, Milan - Obrtlík, Karel - Beran, Přemysl - Kruml, Tomáš
Effect of alloying and thermal processing on mechanical properties of tial alloys.
Materials Structure & Micromechanics of Fracture VIII. Zürrich: Trans Tech Publications, 2017 - (Šandera, P.), s. 501-505. Solid State Phenomena, 258. ISBN 978-3-03835-626-4. ISSN 1662-9779.
[MSMF8. International Conference on Materials Structure and Micromechanics of Fracture /8./. Brno (CZ), 27.06.2016-29.06.2016]
R&D Projects: GA ČR(CZ) GAP107/11/0704
Institutional support: RVO:68081723 ; RVO:61389005
Keywords : Fatigue * Heat treatment * Lamellar microstructure * Mechanical properties * TiAl alloys
OECD category: Audio engineering, reliability analysis; Audio engineering, reliability analysis (UJF-V); Audio engineering, reliability analysis (UFM-A)
Permanent Link: http://hdl.handle.net/11104/0276855 - 10.0449854 - ÚFM 2016 RIV CZ eng C - Conference Paper (international conference)
Chlupová, Alice - Kruml, Tomáš - Roupcová, Pavla - Heczko, Milan - Obrtlík, Karel - Beran, Přemysl
THE EFFECT OF MO AND/OR C ADDITION ON MICROSTRUCTURE AND PROPERTIES OF TIAL ALLOYS.
Metal 2015: 24th International Conference on Metallurgy and Materials. Ostrava: TANGER Ltd, 2015. ISBN 978-80-87294-58-1.
[METAL 2015 - International Conference on Metallurgy and Materials /24./. Brno (CZ), 03.06.2015-05.06.2015]
R&D Projects: GA ČR(CZ) GAP107/11/0704; GA ČR GA15-08826S; GA MŠMT(CZ) ED1.1.00/02.0068
Institutional support: RVO:68081723 ; RVO:61389005
Keywords : TiAl * microstructure * mechanical properties * effect of alloying * fractography
Subject RIV: JL - Materials Fatigue, Friction Mechanics; BM - Solid Matter Physics ; Magnetism (UJF-V)
Permanent Link: http://hdl.handle.net/11104/0251584