Search results
- 1.0561916 - ÚTAM 2023 RIV CZ cze V - Research Report
Šperl, Martin - Gajdoš, Lubomír - Bejdl, Jan
Ověření únavové odolnosti siloměrných čepů 40 kn z materiálu ČSN 17 029.
[Verification of the fatigue resistance of 40 kN pin load gauges from ČSN 17 029 material.]
Praha: STROS-Sedlčanské strojírny, a.s., 2022. 5 s.
Institutional support: RVO:68378297
Keywords : pin load gauge * fatigue * pulsating loading * three-point bending
OECD category: Applied mechanics
Permanent Link: https://hdl.handle.net/11104/0334420 - 2.0548174 - ÚFM 2025 RIV NL eng C - Conference Paper (international conference)
Jindra, D. - Kala, Z. - Kala, J. - Seitl, Stanislav
Experimental and Numerical simulation of a Three Point Bending Test of a Stainless Steel Beam.
Transportation Research Procedia. Vol. 55. Elsevier, 2021, s. 1114-1121. ISSN 2352-1457.
[TRANSCOM 2021 - International scientific conference on sustainable, modern and safe transport /14./. Virtual, 26.05.2021-28.05.2021)]
R&D Projects: GA ČR(CZ) GA20-00761S
Institutional support: RVO:68081723
Keywords : Finite element analysis * Osgood model * Ramberg * Stainless steel * Three-point bending test
OECD category: Civil engineering
Permanent Link: http://hdl.handle.net/11104/0324284 - 3.0546040 - ÚFM 2022 RIV NL eng J - Journal Article
Březina, M. - Hasoňová, M. - Fintová, Stanislava - Doležal, P. - Rednyk, Andrii - Wasserbauer, J.
Mechanical and structural properties of bulk magnesium materials prepared via spark plasma sintering.
Materials Today Communications. Roč. 28, SEP (2021), č. článku 102569. ISSN 2352-4928. E-ISSN 2352-4928
R&D Projects: GA MŠMT(CZ) EF16_013/0001823
Institutional support: RVO:68081723 ; RVO:61389021
Keywords : in-situ precipitation * pure magnesium * plastic-deformation * grain-refinement * alloy * temperature * mg * extrusion * evolution * Magnesium powder metallurgy * sps * Three-point bending * Hardness * Microhardness * Microstructure
OECD category: Materials engineering; Materials engineering (UFP-V)
Impact factor: 3.662, year: 2021
Method of publishing: Limited access
https://www.sciencedirect.com/science/article/pii/S2352492821005602?via%3Dihub
Permanent Link: http://hdl.handle.net/11104/0322622 - 4.0520803 - ÚTAM 2021 RIV CZ cze V - Research Report
Šperl, Martin - Vála, Ondřej - Zíma, Pavel
Zkoušky statické únosnosti čepu na smyk se snímačem síly 65 kN.
[Statics strength test of the steel pin with 65 kN force transducer.]
Praha: STROS-Sedlčanské strojírny, a.s., 2020. 4 s.
Institutional support: RVO:68378297
Keywords : steel pin * strength * three point bending
OECD category: Applied mechanics
Permanent Link: http://hdl.handle.net/11104/0308492 - 5.0507982 - ÚTAM 2020 RIV GB eng C - Conference Paper (international conference)
Rozsypalová, I. - Kumpová, Ivana - Majda, T. - Keršner, Z. - Štancl, P.
Fracture response of cement-based composite with spherical glass aggregate exposed to high temperatures.
IOP Conference Series: Materials Science and Engineering. Vol. 566. Bristol: IOP Publishing, 2019, č. článku 012027. ISSN 1757-899X.
[International scientific conference of civil and environmental engineering for PhD. students and young scientists (YS2019) /11./. Tatranská Lomnica (SK), 25.04.2019-26.04.2019]
Institutional support: RVO:68378297
Keywords : fine-grained cement-based composite * three-point bending * X-ray microtomography
OECD category: Applied mechanics
https://doi.org/10.1088/1757-899X/566/1/012027
Permanent Link: http://hdl.handle.net/11104/0298950 - 6.0498923 - ÚFM 2020 RIV NL eng C - Conference Paper (international conference)
Malíková, Lucie - Klusák, Jan
Influence of the Interfacial Transition Zone on crack behavior in a matrix/aggregate system.
ECF22 - Loading and Environmental effects on Structural Integrity. Amsterdam: Elsevier, 2018 - (Sedmak, A.; Radakovič, Z.; Rakin, M.), s. 1798-1803. Procedia Structural Integrity, 13. ISSN 2452-3216.
[ECF22 - European Conference on Fracture /22./. Belgrade (RS), 26.08.2018-31.08.2018]
R&D Projects: GA ČR(CZ) GA16-18702S
Institutional support: RVO:68081723
Keywords : Matrix/aggregate system * interfacial transition zone * finite element method * three-point bending test * generalized fracture mechanics * bi-material interface
OECD category: Audio engineering, reliability analysis
Permanent Link: http://hdl.handle.net/11104/0300015 - 7.0495761 - ÚFM 2019 RIV CH eng C - Conference Paper (international conference)
Seitl, Stanislav - Miarka, Petr - Klusák, Jan - Domski, J. - Katzer, J. - Šimonová, H. - Keršner, Z.
Change of a crack propagation rate in fine-grained cement-based composites due to partial replacement of aggregate by ceramic waste.
Non-Traditional Cement and Concrete. Zürich: Trans Tech Poblications, 2018 - (Nenadalová, S.; Bílek, V.; Keršner, Z.; Šimonová, H.; Seitl, S.; Bílek, V.), s. 111-115. Key Engineering materials, 761. ISBN 978-3-0383-5440-6. ISSN 1013-9826.
[International Conference Non-Traditional Cement and Concrete /6./. Brno (CZ), 19.07.2017-22.07.2017]
R&D Projects: GA ČR(CZ) GA16-18702S
Institutional support: RVO:68081723
Keywords : Ceramic waste aggregate * Fatigue parameters * Fracture mechanics * Paris law * Three-point bending test
OECD category: Audio engineering, reliability analysis
Permanent Link: http://hdl.handle.net/11104/0289501 - 8.0493029 - ÚTAM 2019 RIV NL eng M - Monography Chapter
Leal, L.N.P. - Drdácký, Miloš - Slížková, Zuzana
Flexural tests on consolidation effects on stone.
Structural analysis of historical constructions. An interdisciplinary approach. Amsterdam: Springer, 2019 - (Aguilar, R.; Torrealva, D.; Moreira, S.; Pando, M.; Ramos, L.), s. 725-733. RILEM Bookseries, 18. ISBN 978-3-319-99440-6
R&D Projects: GA ČR(CZ) GBP105/12/G059
Institutional support: RVO:68378297
Keywords : biaxial bending test * three point bending test * natural stone consolidation
OECD category: Materials engineering
https://doi.org/10.1007/978-3-319-99441-3_78
Permanent Link: http://hdl.handle.net/11104/0286494 - 9.0481493 - ÚFM 2018 RIV IT eng J - Journal Article
Šimonová, H. - Vyhlídal, M. - Kucharczyková, B. - Bayer, P. - Keršner, Z. - Malíková, Lucie - Klusák, Jan
Modelling of interfacial transition zone effect on resistance to crack propagation in fine-grained cement-based composites.
Frattura ed Integrita Strutturale. Roč. 11, č. 41 (2017), s. 211-219. ISSN 1971-8993
R&D Projects: GA ČR(CZ) GA16-18702S
Institutional support: RVO:68081723
Keywords : Effective fracture toughness * Fine-grained concrete * Interfacial transition zone * Three-point bending fracture test * Scanning electron microscopy
OECD category: Audio engineering, reliability analysis
Permanent Link: http://hdl.handle.net/11104/0277153 - 10.0481440 - ÚFM 2018 RIV CH eng J - Journal Article
Březina, M. - Minda, J. - Doležal, P. - Krystýnová, M. - Fintová, Stanislava - Zapletal, J. - Wasserbauer, J. - Ptáček, P.
Characterization of Powder Metallurgy Processed Pure Magnesium Materials for Biomedical Applications.
Metals. Roč. 7, č. 11 (2017), č. článku 461. E-ISSN 2075-4701
Institutional support: RVO:68081723
Keywords : magnesium * powder metallurgy * cold pressing * hot pressing * EIS (Electrochemical impedance spectroscopy) * three-point bending test * corrosion
OECD category: Coating and films
Impact factor: 1.704, year: 2017
http://www.mdpi.com/2075-4701/7/11/461
Permanent Link: http://hdl.handle.net/11104/0277063