Search results
- 1.0582294 - ÚFM 2025 RIV NL eng C - Conference Paper (international conference)
Šulák, Ivo - Chlupová, Alice - Záležák, Tomáš - Kuběna, Ivo - Roth, J. - Jahns, K. - Krupp, U. - Kruml, Tomáš
High-temperature fatigue and creep performance of additively manufactured NiCu-based alloy.
Procedia Structural Intergrity. Vol. 52. Amsterdam: Elsevier, 2024, s. 143-153. ISSN 2452-3216.
[FDM 2023 - International Conference on Fracture, Damage and Structural Health Monitoring /21./. London (GB), 12.09.2023-14.09.2023]
EU Projects: European Commission(XE) 958192 - HORIZON 2020
Institutional support: RVO:68081723
Keywords : Additive manufacturing * Alloy 400 * fatigue lifetime * creep behaviour * electron microscopy
OECD category: Materials engineering
Permanent Link: https://hdl.handle.net/11104/0352922 - 2.0582279 - ÚFM 2025 RIV NL eng C - Conference Paper (international conference)
Vražina, Tomáš - Šulák, Ivo - Nowak, B. - Verma, B. - Krupp, U. - Kruml, Tomáš
Fatigue lifetime assessment and crack propagation of Ni-based VDM Alloy 699 XA produced by additive manufacturing.
Procedia Structural Intergrity. Vol. 52. Amsterdam: Elsevier, 2024, s. 43-51. ISSN 2452-3216.
[FDM 2023 - International Conference on Fracture, Damage and Structural Health Monitoring /21./. London (GB), 12.09.2023-14.09.2023]
EU Projects: European Commission(XE) 958192 - HORIZON 2020
Institutional support: RVO:68081723
Keywords : Additive manufacturing * VDM 699 XA * Paris law * fatigue life performance * fatigue crack propagation
OECD category: Materials engineering
Permanent Link: https://hdl.handle.net/11104/0352917 - 3.0570429 - ÚFM 2025 RIV NL eng C - Conference Paper (international conference)
Man, Jiří - Blinn, B. - Šulák, Ivo - Kuběna, Ivo - Smaga, M. - Chlup, Zdeněk - Kruml, Tomáš - Beck, T. - Polák, Jaroslav
Formation of deformation induced martensite in fatigued 316L steels manufactured by selective laser melting (SLM).
Procedia Structural Integrity. Vol. 43. Amsterdam: Elsevier B. V., 2023 - (Pokluda, J.; Šandera, P.), s. 203-208. ISSN 2452-3216.
[MSMF10 - International Conference on Materials Structure and Micromechanics of Fracture /10./. Brno (CZ), 12.09.2022-14.09.2022]
EU Projects: European Commission(XE) 857124 - Horizont 2020
Institutional support: RVO:68081723
Keywords : Selective laser melting (SLM) * 316L stainless steel * fatigue * deformation induced martensite * cellular dislocation substructure
OECD category: Materials engineering
Permanent Link: https://hdl.handle.net/11104/0341956 - 4.0545238 - ÚFM 2023 RIV CH eng C - Conference Paper (international conference)
Poloprudský, Jakub - Chlupová, Alice - Kruml, Tomáš - Hloch, Sergej
Identification of Local Microplasticity on Ti6Al4V After Impingement of Periodically Acting Water Clusters.
ADVANCES IN MANUFACTURING ENGINEERING AND MATERIALS II, ICMEM 2020. Cham: Springer, 2021 - (Hloch, S.; Pude, F.; Chattopadhyaya, S.; Klichova, D.; Krolczyk, G.), s. 63-74. Lecture Notes in Mechanical Engineering. ISBN 978-3-030-71956-2. ISSN 2195-4356. E-ISSN 2195-4364.
[ICMEM 2020 - International Conference on Manufacturing Engineering and Materials. Nový Smokovec (SK), 21.06.2021-25.06.2021]
R&D Projects: GA ČR(CZ) GA19-00408S
Institutional support: RVO:68081723 ; RVO:68145535
Keywords : Pulsating water jet * Ti6Al4V alloy * Early erosion stage * Initial damage * Erosion * Water clusters * Microplasticity
OECD category: Mechanical engineering; Mechanical engineering (UGN-S)
Permanent Link: http://hdl.handle.net/11104/0322628 - 5.0534388 - ÚFM 2024 RIV CH eng C - Conference Paper (international conference)
Chlupová, Alice - Poczklán, Ladislav - Man, Jiří - Mazánová, Veronika - Heczko, Milan - Kruml, Tomáš
Character of Fatigue Damage under Axial, Torsional and Biaxial Loading of 316L Stainless Steel.
Defect and Diffusion Forum. Vol. 405. Zurich: Trans Tech Publications Ltd., 2020 - (Horňák, P.; Longauerová, M.; Matvija, M.), s. 264-270. ISBN 978-3-0357-1612-2. ISSN 1012-0386.
[International Symposium on Metallography, Fractography and Materials Science /17./. Nový Smokovec, High Tatras (SK), 24.04.2019-26.04.2019]
R&D Projects: GA MŠMT LM2015069; GA MŠMT(CZ) LQ1601; GA ČR(CZ) GA18-03615S
Research Infrastructure: IPMINFRA - 90069
Institutional support: RVO:68081723
Keywords : 316L austenitic steel * Fatigue * Axial loading * Torsional loading * Crack initiation * Crack growth
OECD category: Audio engineering, reliability analysis
Permanent Link: http://hdl.handle.net/11104/0312611 - 6.0533365 - ÚFM 2025 RIV CH eng C - Conference Paper (international conference)
Poloprudský, Jakub - Chlupová, Alice - Kruml, Tomáš - Hloch, Sergej - Hlaváček, Petr - Foldyna, Josef
Effect of Standoff Distance on the Erosion of Various Materials.
Advances in Water Jetting. Cham: Springer, 2021 - (Klichová, D.; Sitek, L.; Hloch, S.; Valentinčič, J.), s. 164-171. Lecture Notes in Mechanical Engineering. ISBN 978-3-030-53490-5. ISSN 2195-4356.
[International Conference on Water Jet 2019 - Research, Development, Applications /6./. Čeladná (CZ), 20.11.2019-22.11.2019]
R&D Projects: GA MŠMT LM2015069; GA MŠMT(CZ) LQ1601; GA ČR(CZ) GA19-00408S
Institutional support: RVO:68081723 ; RVO:68145535
Keywords : 316L steel * 6082 alloy * Fatigue * Pulsating water jet * Surface topography * Ti6al4v alloy
OECD category: Mechanical engineering; Mechanical engineering (UGN-S)
Permanent Link: http://hdl.handle.net/11104/0311769 - 7.0500115 - ÚFM 2020 RIV NL eng C - Conference Paper (international conference)
Wärner, H. - Calmunger, M. - Chai, G. - Polák, Jaroslav - Petráš, Roman - Heczko, Milan - Kruml, Tomáš - Johanson, S. - Moverare, J.
Fracture and Damage Behavior in an Advanced Heat Resistant Austenitic Stainless Steel During LCF, TMF and CF.
ECF22 - Loading and Environmental effects on Structural Integrity. Amsterdam: Elsevier, 2018 - (Sedmak, A.; Radakovič, Z.; Rakin, M.), s. 843-848. Procedia Structural Integrity, 13. ISSN 2452-3216.
[ECF22 - European Conference on Fracture /22./. Belgrade (RS), 26.08.2018-31.08.2018]
R&D Projects: GA MŠMT LM2015069; GA MŠMT(CZ) LQ1601
Institutional support: RVO:68081723
Keywords : AUSC power plant * austenitic heat resistant stainless steel * Sanicro 25 * low cycle fatigue * thermomechanical fatigue
OECD category: Audio engineering, reliability analysis
Permanent Link: http://hdl.handle.net/11104/0301448 - 8.0494057 - ÚFM 2019 RIV CZ eng C - Conference Paper (international conference)
Karol, Michal - Chlupová, Alice - Mazánová, Veronika - Kruml, Tomáš
Fatigue crack initiation and growth in 316L steel in torsional cyclic loading.
Engineering Mechanics 2017 : 23rd international conference : May 15-18, 2017, Svratka, Czech Republic : book of full texts. Brno: University of Technology, Institute of Solid Mechanics, Mechatronics and Biomechanics, 2017 - (Fuis, V.), s. 434-437. ISBN 978-80-214-5497-2.
[Engineering Mechanics 2017 - International Conference /23./. Svratka (CZ), 15.05.2017-18.05.2017]
R&D Projects: GA MŠMT LM2015069; GA ČR GA15-08826S
Institutional support: RVO:68081723
Keywords : 316L austenitic steel * fatigue crack initiation * Crack growth * Torsional loading * Crack path
OECD category: Materials engineering
Permanent Link: http://hdl.handle.net/11104/0289464 - 9.0494051 - ÚFM 2019 RIV CZ eng C - Conference Paper (international conference)
Tinoco Navaro, Hector Andres - Holzer, Jakub - Pikálek, Tomáš - Buchta, Zdeněk - Lazar, Josef - Chlupová, Alice - Kruml, Tomáš - Hutař, Pavel
Estimation of mechanical parameters of thin films using finite element analysis.
Applied Mechanics 2018. Plzeň: Západočská univerzita v Plzni, 2018 - (Lukeš, V.; Rendl, J.; Hajžman, M.; Byrtus, M.), s. 157-162. ISBN 978-80-261-0766-8.
[International Conference Applied Mechanics /20./. Myslovice (CZ), 09.04.2018-11.04.2018]
R&D Projects: GA MŠMT(CZ) EF16_013/0001823
Institutional support: RVO:68081723 ; RVO:68081731
Keywords : bulge test * thin film * finite element analysis * elastic properties
OECD category: Condensed matter physics (including formerly solid state physics, supercond.); Optics (including laser optics and quantum optics) (UPT-D)
Permanent Link: http://hdl.handle.net/11104/0289462 - 10.0494029 - ÚFM 2019 RIV CZ eng C - Conference Paper (international conference)
Holzer, Jakub - Pikálek, Tomáš - Buchta, Zdeněk - Lazar, Josef - Tinoco, H.A. - Chlupová, Alice - Kruml, Tomáš
Development of the bulge test equipment for measuring mechanical properties of thin films.
METAL 2017. 26th International Conference on Metallurgy and Materials. Conference Proceedings. Ostrava: TANGER, 2017, s. 1053-1058. ISBN 978-80-87294-79-6.
[METAL 2017: International Conference on Metallurgy and Materials /26./. Brno (CZ), 24.05.2017-26.05.2017]
R&D Projects: GA MŠMT(CZ) LO1212; GA MŠMT ED0017/01/01
Institutional support: RVO:68081723 ; RVO:68081731
Keywords : thin films * bulge test * mechanical properties
OECD category: Condensed matter physics (including formerly solid state physics, supercond.); Optics (including laser optics and quantum optics) (UPT-D)
Permanent Link: http://hdl.handle.net/11104/0287333