Search results
- 1.0574066 - ÚFM 2024 RIV JP eng J - Journal Article
Sklenička, Václav - Král, Petr - Dvořák, Jiří - Kvapilová, Marie - Kuchařová, Květa
Creep in Nanostructured Materials.
Materials Transactions. Roč. 64, č. 7 (2023), s. 1566-1574. ISSN 1345-9678. E-ISSN 1347-5320
Institutional support: RVO:68081723
Keywords : creep * severe plastic * deformation * ultrafine-grained materials * microstructure evolution
OECD category: Materials engineering
Impact factor: 1.2, year: 2022
Method of publishing: Limited access
https://www.jstage.jst.go.jp/article/matertrans/64/7/64_MT-MF2022035/_article
Permanent Link: https://hdl.handle.net/11104/0344432 - 2.0533786 - ÚFM 2021 RIV DE eng J - Journal Article
Bulutsuz, A. G. - Chrominski, W. - Huang, Yi. - Král, Petr - Yurci, M.E. - Lewandowska, M. - Langdon, T.G.
A Comparison of Warm and Combined Warm and Low-Temperature Processing Routes for the Equal-Channel Angular Pressing of Pure Titanium.
Advanced Engineering Materials. Roč. 22, č. 2 (2020), č. článku 1900698. ISSN 1438-1656. E-ISSN 1527-2648
Institutional support: RVO:68081723
Keywords : commercial-purity titanium * ultrafine-grained materials * corrosion-fatigue strength * high-pressure torsion * mechanical-properties * multiple passes * alloys * ecap * cytocompatibility * microstructure * commercial purity titanium * equal-channel angular pressing * hardness * processing routes * ultrafine grains
OECD category: Materials engineering
Impact factor: 3.862, year: 2020
Method of publishing: Open access
https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.201900698
Permanent Link: http://hdl.handle.net/11104/0312074 - 3.0525105 - ÚFM 2021 RIV CH eng J - Journal Article
Král, Petr - Dvořák, Jiří - Sklenička, Václav - Horita, Z. - Takizawa, Y. - Tang, Y. - Kvapilová, Marie - Svobodová, M.
Effect of ultrafine-grained microstructure on creep behaviour in 304L austenitic steel.
Materials Science and Engineering A Structural Materials Properties Microstructure and Processing. Roč. 785, MAY (2020), č. článku 139383. ISSN 0921-5093. E-ISSN 1873-4936
R&D Projects: GA ČR(CZ) GA19-18725S
Institutional support: RVO:68081723
Keywords : Creep-resistant steels * Ultrafine-grained materials * Creep behaviour * Microstructure
OECD category: Materials engineering
Impact factor: 5.234, year: 2020
Method of publishing: Limited access
https://www.sciencedirect.com/science/article/pii/S0921509320304640?via%3Dihub
Permanent Link: http://hdl.handle.net/11104/0309317 - 4.0491887 - ÚFM 2019 RIV CH eng J - Journal Article
Král, Petr - Dvořák, Jiří - Sklenička, Václav - Masuda, T. - Horita, Z. - Kuchařová, Květa - Kvapilová, Marie - Svobodová, M.
The Effect of Ultrafine-Grained Microstructure on Creep Behaviour of 9% Cr Steel.
Materials. Roč. 11, č. 5 (2018), č. článku 787. E-ISSN 1996-1944
R&D Projects: GA ČR(CZ) GA16-09518S
Institutional support: RVO:68081723
Keywords : high-pressure torsion * severe plastic-deformation * martensite ferritic steels * fe2w laves phase * long-term creep * strengthening mechanisms * precipitation behavior * resistant steels * room-temperature * 9cr steels * creep-resistant 9% Cr steels * ultrafine grained materials * creep * electron back scatter diffraction
OECD category: Materials engineering
Impact factor: 2.972, year: 2018
Permanent Link: http://hdl.handle.net/11104/0286827 - 5.0489151 - ÚFM 2019 RIV CH eng J - Journal Article
Král, Petr - Dvořák, Jiří - Sklenička, Václav - Masuda, T. - Horita, Z. - Kuchařová, Květa - Kvapilová, Marie - Svobodová, M.
Microstructure and creep behaviour of P92 steel after HPT.
Materials Science and Engineering A Structural Materials Properties Microstructure and Processing. Roč. 723, APR (2018), s. 287-295. ISSN 0921-5093. E-ISSN 1873-4936
R&D Projects: GA ČR(CZ) GA16-09518S
Institutional support: RVO:68081723
Keywords : Creep-resistant 9%Cr steels * Ultrafine grained materials * Creep * EBSD
OECD category: Materials engineering
Impact factor: 4.081, year: 2018
Method of publishing: Limited access
https://www.sciencedirect.com/science/article/pii/S0921509318304088?via%3Dihub
Permanent Link: http://hdl.handle.net/11104/0286677 - 6.0481729 - ÚFP 2018 RIV US eng J - Journal Article
Lukáč, František - Chráska, Tomáš - Molnárová, O. - Málek, P. - Cinert, Jakub
Effect of cryogenic milling on Al7075 prepared by spark plasma sintering method.
Powder Diffraction. Roč. 32, S1 (2017), S221-S224. ISSN 0885-7156. E-ISSN 1945-7413.
[European Powder Diffraction Conference (EPDIC) /15./. Bari, 12.06.2016-15.06.2016]
R&D Projects: GA ČR(CZ) GA15-15609S
Institutional support: RVO:61389021
Keywords : Intermetallic precipitates * cryogenic milling * powder metallurgy * ultrafine-grained materials * Al7075 alloy
OECD category: Materials engineering
Impact factor: 0.519, year: 2017
https://www.cambridge.org/core/journals/powder-diffraction/article/effect-of-cryogenic-milling-on-al7075-prepared-by-spark-plasma-sintering-method/17E9F722BAFD428BA7310194FEE551C6
Permanent Link: http://hdl.handle.net/11104/0277235 - 7.0476974 - ÚFP 2018 RIV GB eng C - Conference Paper (international conference)
Málek, P. - Molnárová, O. - Cinert, Jakub - Lukáč, František - Chráska, Tomáš
Processing of bulk Al7075 alloy by spark plasma sintering.
IOP Conference Series: Materials Science and Engineering. Vol. 179. Bristol: Institute of Physics Publishing ( IOP ), 2017 - (Dzugan, J.), č. článku 012050. IOP Conference Series. ISSN 1757-8981.
[International Conference Recent Trends in Structural Materials (COMAT)/4./. Pilsen (CZ), 09.11.2016-11.11.2016]
R&D Projects: GA ČR(CZ) GA15-15609S
Institutional support: RVO:61389021
Keywords : AL7075 alloy * Spark Plasme Sintering * Intermetallic precipitates * ultrafine-grained materials
OECD category: Materials engineering
http://iopscience.iop.org/article/10.1088/1757-899X/179/1/012050
Permanent Link: http://hdl.handle.net/11104/0273448 - 8.0472887 - ÚFP 2017 RIV CZ eng C - Conference Paper (international conference)
Molnárová, O. - Málek, P. - Nemeth, G. - Kozlík, J. - Lukáč, František - Chráska, Tomáš - Cinert, Jakub
THE INVESTIGATION OF AN Al7075 ALLOY PREPARED BY SPARK PLASMA SINTERING OF MILLED POWDERS.
METAL 2016 – Conference proceedings: 25th Anniversary International Conference on Metallurgy and Materials. Ostrava: TANGER Ltd., Ostrava, 2016, s. 1200-1205. METAL. ISBN 978-80-87294-67-3.
[METAL 2016 - 25th Anniversary International Conference on Metallurgy and Materials/25./. Brno (CZ), 25.05.2016-27.05.2016]
Institutional support: RVO:61389021
Keywords : Cryo-milling * Spark plasma sintering * Ultrafine-grained materials * Milling
Subject RIV: JK - Corrosion ; Surface Treatment of Materials
Permanent Link: http://hdl.handle.net/11104/0270114 - 9.0435501 - ÚFM 2015 RIV CH eng C - Conference Paper (international conference)
Sklenička, Václav - Král, Petr - Dvořák, Jiří - Kvapilová, Marie - Svoboda, Milan
Microstructure evolution and creep behavior in ECAP processed metallic materials.
THERMEC 2013. Zurich: Trans Tech Publications, 2014 - (Mishra, B.; Ionescu, M.; Chandra, T.), s. 2689-2694. Materials Science Forum, 783-786. ISBN 978-3-03835-073-6. ISSN 0255-5476.
[THERMEC 2013 - International Conference on Processing and Manufacturing of Advanced Materials /8/. Las Vegas (US), 02.12.2013-06.12.2013]
R&D Projects: GA ČR(CZ) GAP108/11/2260; GA MŠMT(CZ) ED1.1.00/02.0068
Institutional support: RVO:68081723
Keywords : Equal-channel angular pressing (ECAP) * Creep * Ultrafine-grained materials * Orientation imaging microscopy * Structure homogeneity * Nanoporosity
Subject RIV: JG - Metallurgy
Permanent Link: http://hdl.handle.net/11104/0239326 - 10.0434600 - ÚFM 2015 RIV NL eng C - Conference Paper (international conference)
Kunz, Ludvík - Fintová, S.
Initiation of fatigue cracks in ultrafine-grained materials in highcycle fatigue region.
XVII International Colloquium on Mechanical Fatigue of Metals (ICMFM17). Amsterdam: Elsevier, 2014 - (Gulagliano, M.; Vergani, L.), s. 2-5. Procedia Engineering, 74. ISSN 1877-7058.
[ICMFM 2014 International Colloquium on Mechanical Fatigue of Metals /17./. Verbania (IT), 25.06.2014-27.06.2014]
Institutional support: RVO:68081723
Keywords : Cyclic slip bands * Fatigue crack initiation * Fatigue of ultrafine-grained materials * Localization of cyclic platicity * Point defects
Subject RIV: JL - Materials Fatigue, Friction Mechanics
Permanent Link: http://hdl.handle.net/11104/0238639