Search results
- 1.0583045 - ÚFM 2025 RIV CH eng M - Monography Chapter
Dvořák, Jiří - Král, Petr - Kadomtsev, A. G. - Betekhtin, V. I. - Narykova, M. V. - Kvapilová, Marie - Sklenička, Václav
Influence of Processing Technology on Creep Damage of Ultrafine-Grained Titanium.
Applied Materials Research. CH-8806 Beach: Trans Tech Publications Ltd, 2022 - (Kasl, J.; Nguyen, T.; Quin, Q.; Ferreira, F.), s. 93-98. Key Engineering Materials, 923. ISBN 978-3-0364-1099-9
R&D Projects: GA ČR(CZ) GC20-14450J
Institutional support: RVO:68081723
Keywords : titanium * severe plastic deformation * ultrafine-grained material
OECD category: Materials engineering
Permanent Link: https://hdl.handle.net/11104/0352957 - 2.0574572 - ÚFM 2024 RIV GB eng J - Journal Article
Fintová, Stanislava - Kunz, Ludvík - Chlup, Zdeněk - Kuběna, Ivo - Mertová, K. - Hradil, D. - Duchek, M.
Grain refinement effect on fatigue life of two grades of commercially
pure titanium.
International Journal of Fatigue. Roč. 176, NOV (2023), č. článku 107883. ISSN 0142-1123. E-ISSN 1879-3452
Institutional support: RVO:68081723
Keywords : Titanium grade 2 * Titanium grade 4 * Fatigue * Ultrafine-grained structure * Fatigue crack initiation * ECAP * Conform ECAP
OECD category: Materials engineering
Impact factor: 6, year: 2022
Method of publishing: Open access
https://www.sciencedirect.com/science/article/pii/S0142112323003845?via%3Dihub
Permanent Link: https://hdl.handle.net/11104/0344751 - 3.0574066 - ÚFM 2024 RIV JP eng J - Journal Article
Sklenička, Václav - Král, Petr - Dvořák, Jiří - Kvapilová, Marie - Kuchařová, Květa
Creep in Nanostructured Materials.
Materials Transactions. Roč. 64, č. 7 (2023), s. 1566-1574. ISSN 1345-9678. E-ISSN 1347-5320
Institutional support: RVO:68081723
Keywords : creep * severe plastic * deformation * ultrafine-grained materials * microstructure evolution
OECD category: Materials engineering
Impact factor: 1.2, year: 2022
Method of publishing: Limited access
https://www.jstage.jst.go.jp/article/matertrans/64/7/64_MT-MF2022035/_article
Permanent Link: https://hdl.handle.net/11104/0344432 - 4.0570646 - FZÚ 2024 RIV GB eng J - Journal Article
Tesař, Karel - Koller, Martin - Vokoun, David - Tyc, Ondřej - Čech, J. - Sedlák, Petr
Texture, elastic anisotropy and thermal stability of commercially pure titanium prepared by room temperature ECAP.
Materials & Design. Roč. 226, Feb (2023), č. článku 111678. ISSN 0261-3069
R&D Projects: GA ČR(CZ) GA17-05360S; GA ČR(CZ) GA22-20181S; GA MŠMT(CZ) EF16_019/0000760
Grant - others:OP VVV - SOLID21(XE) CZ.02.1.01/0.0/0.0/16_019/0000760
Institutional support: RVO:68378271 ; RVO:61388998
Keywords : equal channel angular pressing * ultrafine-grained grade 2 Ti * (0001) texture * resonant ultrasound spectroscopy * elastic anisotropy * defect annealing
OECD category: Condensed matter physics (including formerly solid state physics, supercond.); Materials engineering (UT-L)
Method of publishing: Open access
Permanent Link: https://hdl.handle.net/11104/0341966File Download Size Commentary Version Access 0570646.pdf 0 4.6 MB CC BY Licence Publisher’s postprint open-access - 5.0566797 - ÚFM 2023 RIV US eng J - Journal Article
Edalati, K. - Bachmaier, A. - Beloshenko, V. A. - Beygelzimer, Y. - Blank, Vladimir D. - Botta, Walter J. - Bryla, K. - Cizek, J. - Divinski, S. - Enikeev, N. A. - Estrin, Y. - Faraji, G. - Figueiredo, Roberto B. - Fuji, M. - Furuta, T. - Grosdidier, T. - Gubicza, J. - Hohenwarter, A. - Horita, Z. - Huot, J. - Ikoma, Y. - Janecek, M. - Kawasaki, M. - Král, Petr - Kuramoto, S. - Langdon, T.G. - Leiva, D. - Levitas, V. - Mazilkin, A. - Mito, M. - Miyamoto, M. - Nishizaki, T. - Pippan, R. - Popov, V. V. - Popova, E.N. - Purcek, G. - Renk, O. - Révész, A. - Sauvage, X. - Sklenička, Václav - Skrotzki, W. - Straumal, B. B. - Suwas, S. - Toth, L. S. - Tsuji, N. - Valiev, R. Z. - Wilde, G. - Zehetbauer, M.J. - Zhu, X.
Nanomaterials by severe plastic deformation: review of historical developments and recent advances.
Materials Research Letters. Roč. 10, č. 4 (2022), s. 163-256. ISSN 2166-3831. E-ISSN 2166-3831
Institutional support: RVO:68081723
Keywords : severe plastic deformation (SPD) * surface severe plastic deformation * ultrafine-grained (UFG) materials * mechanical properties * functional properties
OECD category: Materials engineering
Impact factor: 8.3, year: 2022
Method of publishing: Open access
https://www.tandfonline.com/doi/full/10.1080/21663831.2022.2029779
Permanent Link: https://hdl.handle.net/11104/0338338 - 6.0544713 - ÚFM 2022 RIV NL eng J - Journal Article
Fintová, Stanislava - Dlhý, Pavol - Mertová, K. - Chlup, Zdeněk - Duchek, M. - Procházka, R. - Hutař, Pavel
Fatigue properties of UFG Ti grade 2 dental implant vs. conventionally tested smooth specimens.
Journal of the Mechanical Behavior of Biomedical Materials. Roč. 123, NOV (2021), č. článku 104715. ISSN 1751-6161. E-ISSN 1878-0180
Grant - others:AV ČR(CZ) StrategieAV21/5
Program: StrategieAV
Institutional support: RVO:68081723
Keywords : Dental implant * Fatigue * SLA treatment * Ti grade 2 * Ultrafine-grained
OECD category: Materials engineering
Impact factor: 4.042, year: 2021
Method of publishing: Limited access
https://www.sciencedirect.com/science/article/pii/S175161612100374X?via%3Dihub
Permanent Link: http://hdl.handle.net/11104/0322631 - 7.0543339 - ÚFM 2022 RIV CH eng J - Journal Article
Sklenička, Václav - Dvořák, Jiří - Král, Petr - Betekhtin, V. I. - Kadomtsev, A. G. - Narykova, M. V. - Dobatkin, S.V. - Kuchařová, Květa - Kvapilová, Marie
Influence of a prior pressurization treatment on creep behaviour of an ultrafine-grained Zr-2.5%Nb alloy.
Materials Science and Engineering A Structural Materials Properties Microstructure and Processing. Roč. 820, JUL (2021), č. článku 141570. ISSN 0921-5093. E-ISSN 1873-4936
R&D Projects: GA ČR(CZ) GC20-14450J
Institutional support: RVO:68081723
Keywords : Creep testing * Electron microscopy * High hydrostatic pressure * Nanoporosity * Ultrafine-grained material * Zirconium alloy
OECD category: Materials engineering
Impact factor: 6.044, year: 2021
Method of publishing: Limited access
https://www.sciencedirect.com/science/article/pii/S092150932100839X?via%3Dihub
Permanent Link: http://hdl.handle.net/11104/0321710 - 8.0533786 - ÚFM 2021 RIV DE eng J - Journal Article
Bulutsuz, A. G. - Chrominski, W. - Huang, Yi. - Král, Petr - Yurci, M.E. - Lewandowska, M. - Langdon, T.G.
A Comparison of Warm and Combined Warm and Low-Temperature Processing Routes for the Equal-Channel Angular Pressing of Pure Titanium.
Advanced Engineering Materials. Roč. 22, č. 2 (2020), č. článku 1900698. ISSN 1438-1656. E-ISSN 1527-2648
Institutional support: RVO:68081723
Keywords : commercial-purity titanium * ultrafine-grained materials * corrosion-fatigue strength * high-pressure torsion * mechanical-properties * multiple passes * alloys * ecap * cytocompatibility * microstructure * commercial purity titanium * equal-channel angular pressing * hardness * processing routes * ultrafine grains
OECD category: Materials engineering
Impact factor: 3.862, year: 2020
Method of publishing: Open access
https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.201900698
Permanent Link: http://hdl.handle.net/11104/0312074 - 9.0525105 - ÚFM 2021 RIV CH eng J - Journal Article
Král, Petr - Dvořák, Jiří - Sklenička, Václav - Horita, Z. - Takizawa, Y. - Tang, Y. - Kvapilová, Marie - Svobodová, M.
Effect of ultrafine-grained microstructure on creep behaviour in 304L austenitic steel.
Materials Science and Engineering A Structural Materials Properties Microstructure and Processing. Roč. 785, MAY (2020), č. článku 139383. ISSN 0921-5093. E-ISSN 1873-4936
R&D Projects: GA ČR(CZ) GA19-18725S
Institutional support: RVO:68081723
Keywords : Creep-resistant steels * Ultrafine-grained materials * Creep behaviour * Microstructure
OECD category: Materials engineering
Impact factor: 5.234, year: 2020
Method of publishing: Limited access
https://www.sciencedirect.com/science/article/pii/S0921509320304640?via%3Dihub
Permanent Link: http://hdl.handle.net/11104/0309317 - 10.0517145 - ÚFM 2020 RIV CH eng J - Journal Article
Blum, W. - Dvořák, Jiří - Král, Petr - Eisenlohr, P. - Sklenička, Václav
Strain Rate Contribution due to Dynamic Recovery of Ultrafine-Grained Cu–Zr as Evidenced by Load Reductions during Quasi-Stationary Deformation at 0.5 Tm.
Metals. Roč. 9, č. 11 (2019), č. článku 1150. E-ISSN 2075-4701
Institutional support: RVO:68081723
Keywords : Cu–Zr * ECAP * ultrafine-grained material * deformation * dynamic recovery * transient * load change tests
OECD category: Materials engineering
Impact factor: 2.117, year: 2019
Method of publishing: Open access
https://www.mdpi.com/2075-4701/9/11/1150/htm
Permanent Link: http://hdl.handle.net/11104/0302509