Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Publicly Available Published by De Gruyter August 31, 2013

Diffusion coefficients in systems LDPE+cyclohexane and LDPE+benzene

  • Alena Randová EMAIL logo , Lidmila Bartovská , Štěpán Hovorka , Tomáš Bartovský , Pavel Izák , Magda Poloncarzová and Karel Fries
From the journal e-Polymers
https://doi.org/10.1515/epoly.2010.10.1.742
Download article (PDF)

Abstract

The swelling of the low density polyethylene in organic liquids (cyclohexane and benzene) was studied. The area of swelling was measured as a function of temperature and time. The experimental data were used for calculating the diffusion coefficients and the activation energies of this process.

Keywords: swelling; diffusion coefficients; low density polyethylene; organic liquids
Published Online: 2013-8-31
Published in Print: 2010-12-1

© 2013 by Walter de Gruyter GmbH & Co.

Download article (PDF)
From the journal
e-Polymers
e-Polymers
Volume 10 Issue 1
Submit manuscript

Journal and Issue

Articles in the same Issue

Non-isothermal degradation kinetics for polycarbonate/ polymethylphenylsilsesquioxane composites
Konjac glucomannan nanocrystals prepared by acid hydrolysis
Investigation of gel-spun PAN fiber morphology by membrane technology techniques
Modification of poly(D,L-lactic acid)-co-poly(ethylene glycol) copolymer by low energy electron beam (EB) radiation
Effect of cure cycle on temperature/degree of cure field and hardness for epoxy resin
Hydrodegradation of starch incorporated polylactic acid with acrylic acid as interfacial linker
Fabrication and characterization of collagen (shell) /thermoplastic polyurethane (core) composite nanofibers by coaxial electrospinning
Miscibility and crystallization kinetics of poly(ε- caprolactone)/bezoxazine blends
Urbach tail analysis on the defect states of polypyrrole thin films prepared by AC plasma polymerization Urbach tail analysis on the defect states of polypyrrole thin films prepared by AC plasma polymerization
Synthesis and characterization of novel optically active, poly(ester-imide)s bearing calix[4]arene and amino acid moieties: ionophoric properties and extraction abilities towards alkali-metal cations
Synthesis and property studies of oligomer obtained from the reaction of 4-vinylbenzocyclobutene and styrene with divinyl tetramethyl disiloxane-bisbenzocyclobutene
Piezoresistive polymer composites based on EPDM and MWNTs for strain sensing applications
The effect of vinyl benzyl chloride on emulsion polymerization of styrene
Modification of PVDF properties by dielectric barrier discharge treatment
Preparation of submicron ion-exchange fibers and application in copper ions removal from aqueous solutions
Dependence of comonomer effect and hydrogen effect on internal donor in ethylene/1-hexene copolymerizations with MgCl2-supported catalysts
L-Lactide polymerization by calix[4]arene-titanium (IV) complex using conventional heating and microwave irradiation
Epoxy-based nanocomposites with amine modified single walled carbon nanotubes
Characterization of orientation in polyethylene by scratch testing
Thermal degradation behaviours of flame-retardant polycarbonate containing potassium diphenyl sulfonate and polymethylphenylsilsesquioxane
Nucleation loci in the ring-opening polymerization of octamethyl- cyclo-tetrasiloxane in Winsor I system with dodecylbenzene sulfonic acid sodium salt and sulfuric acid
MgH2/PEG initiating system for ring opening polymerization of lactone and lactide
Preparation and properties of polyurethane foams from hydroxypropoxy derivatives of urea and isocyanates
Polypyrrole-modified starch films: structural, thermal, morphological and electrical characterization
Block copolymerization of 2,2-dimethyltrimethylene carbonate with adipic anhydride catalyzed by lanthanum tris(2,6-di-tert-butyl-4-methylphenolate)
Study of the rheological properties of polypropylene/talc/nanoclay ternary hybrid nano composites
Synthesis of ATRP macroinitiator based on synthetic cis- 1,4-polyisoprene and its application for graft polymerization of MMA
Effect of P(St-EGDMA)/P(MMA- St-BA-MA) core shell particles on dyeable fine polypropylene fibres
Effect of PVP content on the quaternized polysulfone in blend membranes
Charge storage and mechanical properties of porous PTFE and composite PTFE/COC electrets
Interfacial properties of all-polypropylene composites
Synthesis and properties of hyperbranched polyurethane elastomers based on dimer fatty acid-ethylene glycol polyester diol
Optimization of chitosan-polyvinylalcohol electrospinning process by response surface methodology (RSM)
Preparation and Investigation of chitosan nanoparticles including salicylic acid as a model for an oral drug delivery system
Study of polyamide-6 hollow fiber membranes prepared via a thermally induced phase-separation method
Preparation and characterization of poly(propylene carbonate)/polystyrene composite films by melt-extrusion method
An algorithm for Monte Carlo modeling of hyperbranched polymerization
Cosmeto-textile from formulation to characterization: an overview
Fire retardancy effect of aluminium phosphinate and melamine polyphosphate in glass fibre reinforced polyamide 6
Post-irradiation effects on Nylon-fibers reinforced concretes
macroporous hydrogels based on 2-hydroxyethyl methacrylate. Part 7: Methods of preparation and comparison of resulting physical properties
Thermoresponsive aggregation behavior of NiPAAm/glyco monomer block copolymers studied by dynamic light scattering
Research of mechanical strength enhanced fibrin-PLGA hybrid scaffold with its effect on proliferation of rMSC
Preparation of ZnO/PMMA inorganic/organic composite microspheres via soap less emulsion polymerization
Improvement of thermal properties of polyhydroxybutyrate by grafted chemicals
Probing superficial and mechanical behaviors of nanosilica incorporated poly(acrylate) hybrid latexes
Methacrylate copolymers with substituted azobenzene side groups: synthesis, characterization and photo-induced birefringence properties
Tensile behaviour of rubber-modified polyester resin materials
Microwave-assisted ring-opening polymerization of poly (glycolic acid-co-lactic acid) copolymers
Correlation between solution and gel properties of copolymers of acrylamide and diallyldimethylammonium chloride
Role of interfacial interaction on the crystallization behavior and melting characteristics of PP/Nano-CaCO3 composites modified with different compatibilizers
Synthesis of conductive nanocomposites based on polyaniline/poly(styrene-alt-maleic anhydride)/polystyrene
External potential dynamics simulation of the compatibility of T-shaped graft copolymer compatibilizing two immiscible homopolymers
Tuning of multicompartment micelles from cross-linkable ABC triblock copolymer with the addition of core-forming homopolymer
Synthesis and kinetic studies of TiO2/polystyrene composite particles by emulsion polymerization
Development of synthetic extracellular bone matrix on poly(L-lactic acid) substrates via electrostatic selfassembly and biomimetic mineralization technologies
Synthesis of UV-curable resin/ZnO composite films as pH buffering material
Synthesis, third-order nonlinear optical (NLO) properties of polystyrene containing 1,8-naphthalimide chromophores in the side chain
Effect of marble particle size and gamma irradiation on mechanical properties of polymer concrete
Flexible plasticized PLA with high crystallinity obtained by controlling the annealing temperature
Combustion and thermal behaviors of the novel UV-cured intumescent flame retardant coatings containing phosphorus and nitrogen
Synthesis and characterization of cis-5-norbornene-2,3- dicarboxylic anhydride-chitosan
Synthesis and quaternization of nitroxide-terminated poly(4-vinylpyridine-co-acrylonitrile) macroinitiators and related diblock copolymers
Kinetics and thermodynamics of indanthrene textile dye adsorption onto chitosan
Synthesis and characterization of α-butyl-ω-{3-[(2,2- dihydroxymethyl)-propionyloxy]}propyl polydimethyl siloxane
Diffusion coefficients in systems LDPE+cyclohexane and LDPE+benzene
Characterization of chitin and chitosan extracted from shrimp shells by two methods
Poly(ethylene terephthalate)-carbon nanofiber nano composite for fiber spinning; properties and combustion behavior
Novel low-band-gap conjugated polymers using an alternating donor/acceptor repeat unit
Studies on the properties and the thermal decomposition kinetics of natural rubber prepared with calcium chloride
Stereocomplexes formation from enantiomeric star-shaped block copolymers of ε-caprolactone and lactide
The preparation of phosphorylcholine-containing poly(Llactide) nanoparticles with solvent evaporation method
Essential work of fracture study on thermoplastic polyolefin filled with silicon carbide nanoparticles
Property of poly(hydroxybutyrate) complexed polymer with soy protein isolate using glycerol as a medium
Preparation and characterization of 1,2,4,5-benzenetetra carboxylic-chitosan
Study on the aqueous two-phase copolymerization of cationic polyacrylamide
Effects of comonomer content, comonomer distribution and crystallization condition on crystallinity and dimension of crystal lattice of ethylene-propylene copolymers
ATRP of MMA initiated by 2-bromoisobutyric acid 4-(2- benzothiazole-2-yl-vinyl)-phenyl ester (BPBVE) and its fluorescent property in the presence of metal ions
Preparation and characterization of hydroxybutyl chitosan
A convenient method to acquire third-order NLO materials by ATRP
Comparison of cation effects on phase transitions of kappa and iota carrageenan
Synthesis of long chain semiaromatic polyamides based on decanediamine
Synthesis and water/oil repellency properties of cationic perfluoralkyl acrylate copolymer latices
Thermal characterization of novel aliphatic polyesters with ether and thioether linkages
Poly(α-hydroxyacids) in biomedical applications: synthesis and properties of lactic acid polymers
Catalytic activity of V2O5 on aniline polymerization and the study of structural properties of poly(aniline)/V2O5 nano composite
Determination of thermorheological phase diagram of poly(propylene)/poly(ethylene-b-ethylene oxide) blends
Photosensitive poly(ether sulfone)s for thiol/ene UV curable coatings: synthesis, characterization and crosslinking
Synthesis and physicochemical characterization of branched poly(monomethyl itaconate)
Functionalization of polypropylene and compatibilization of polypropylene/nylon 6 blends with copolymers containing α-methyl styrene units
Synthesis and micellization of polydimethylsiloxane– carboxy-terminated poly(ethylene oxide) graft copolymer in aqueous and organic media and its application for the synthesis of core-shell magnetite particles
Investigation and modeling of the thermal conductivity of PP/clay nanocomposites and PP/MWCNT nanocomposites
Effects of kaolin and maleic anhydride contents on melt elasticity and flexural behaviour of polypropylene/kaolin and unplasticised poly(vinyl chloride)/kaolin composites
Competing effect of shear and β-nucleating agent on the crystallization of injection-molded iPP
Microstructures of fiber suspensions in complex geometry
Effects of carbon nanofibers on the crystallization behavior of polyethylene oxide
Preparation of vinyl polymer/polyurethane hybrid latex particles and their application in nano-sized vinyl polymer particle/thermoplastic polyurethane blends
Surface and electrical properties of high density polyethylene + carbon black composites near the percolation threshold
Preparation of core-shell polymeric nanocapsules containing liquid cores via redox interfacial-initiated microemulsion polymerization
Influence of silica content in sulfonated polysulfone/ phosphotungstic acid hybrid membranes on properties for fuel cell application
Comparison of Matrix Assisted Laser Desorption/ Ionization Mass Spectrometry with Electrospray Ionisation Mass Spectrometry for the characterisation of semitelechelic polyethylene oxide
Non-isothermal crystallization kinetics of isotactic polypropylene nucleated with nucleating agent bicyclic [2,2,1] heptane di-carboxylate
Effect of PTW on crystallization kinetics of toughened PBT/PC blends
Challenges in preparation of metal-containing nanocomposites; dispersion of titanium into plastics
Study on micro-phase separation structure of poly(ethylene terephthalate)-poly(hexylene terephthalate) (PET-PCT) copolymer
Preparation and swelling behavior of pH-sensitive and saltresistant amphoteric semi-IPNs hydrogels based on starch phosphate and poly[2-[(methacryloyloxy) ethyl] trimethylammonium] chloride
Mechanical and hygrothermal aging study on quaternary polyamide 6/maleated styrene-ethylene-butylenestyrene/ clay/short glass fiber hybrid composites
Physicochemical properties and molecular weight characterisation of porcine dermal collagen digested under varying conditions with clostridium histolytic collagenase
Nucleating effect of surface modified MWNTs on crystallization of MWNTs/PA6 composites
Graft polymers prepared by catalytic chain transfer polymerization (CCTP) and applied as solvent-borne dispersants for carbon black dispersions of high solid
Fabrication of poly(lactic acid) scaffolds by a modified solvent casting/porogen leaching method
Synthesis, characterization and antifungal properties of N,O-(acyl)-N-(trimethyl) chitosan chloride
Thermal stability and mechanical properties of modified starch/NR composite
In situ formation of silver nanoparticles based on dendriticlinear amphiphilic block copolymer micellar templates
Study on the effect of processing conditions on the mechanical properties of PP/PC/SEBS ternary blends using Taguchi experimental analysis
Critical conversion in the processes of polymer formation
Novel silane based cross-linkers for preparation of methyl methacrylate gels
Characterization of hydroxylated hyperbranched polyesters of fourth and fifth generation
Thermomechanical behavior and nonisothermal crystallization kinetics of poly(ε-caprolactone) and poly(ε- caprolactone)/poly(N-vinylpyrrolidone) blends
Preparation and characterization of flame retardant epoxy resins based on phosphorus-containing biphenyl-type phenolic resin
Hybrid polymer/nanocrystalline TiO2 composites prepared via low-temperature in-matrix crystallization of titania
On the metastability of β phase in isotactic polypropylene: experiments and numerical simulation
Synthesis and characterization of temperature/pH-sensitive hydroxypropylcellulose/ sodium alginate hydrogel
Liquid crystalline polyureas with oligo(ethylene glycol) sequences
Aqueous chemical grafting of modified-PEG onto maghemite nanoparticles: Influence of grafting conditions
Rheological characterization of polystyrene melts dissolved with supercritical nitrogen fluid during microcellular injection moulding
Second harmonic generation and photochromic grating in guest-host polymer system containing azo amide chromophores
Preparation of the crosslinked polymer electrolyte membranes based on a hyperbranched poly(amidoamine) and their proton conductivity
Synthesis and characterization of novel value added biodegradable poly(aleuritic acid) from renewable resources (shellac) and invertible amphiphilic behaviors in various solvents
Isothermal crystallization of high density polyethylene with monomodal and bimodal molar mass distribution
Variable surface properties of PTFE foils
Enhanced impact strength and deviated thermal decomposition of PP and PS toughened with graft-modified rubbers
Characterization of copolymerization of acrylonitrile with the functionalized comonomers in dimethyl sulfoxide solvent and copolymers suitable for carbon fibers
Curing kinetics study of epoxy resin/hyperbranched poly(amideamine)s system by non-isothermal and isothermal DSC
Synthesis and properties of poly(arylene imino) containing fluorenone group (PIKF)
A study on hybrid oligomeric type II photoinitiator
Copolymerzation of L,L-lactide with ε-caprolactone by using novel zinc L-proline organometallic catalyst
The properties of sericin/poly(vinyl alcohol) films modified by boric acid
Synthesis and characterization of novel benzoxazines containing nitrile and allyl groups and their polymers
Synthesis and thermal stability of star polymer with eight arms using polyhedral oligomeric silsesquioxane as a core
Study on LLDPE molecular structure characterization by preparative and analytical cross-fractionation
Synthesis and characterization of organogel from poly(acrylic acid) with cellulose acetate
Nitroxide-mediated polymerization of styrene in the presence of a novel trinitroxide
Preparation and characterization of hydroxybutyl chitosan
Heterogeneization of alpha diimines nickel catalysts for the polymerization of ethylene and methylmethacrylate
Preparation and mechanical properties of PCL-based polyurethanes as potential biomaterials for short-term applications
Downloaded on 28.4.2024 from https://www.degruyter.com/document/doi/10.1515/epoly.2010.10.1.742/html
Scroll to top button