Abstract
Erosion caused by water droplets is constantly in flux for practical and fundamental reasons. Due to the high accumulation of knowledge in this area, it is already possible to predict erosion development in practical scenarios. Therefore, the purpose of this study is to use machine learning models to predict the erosion action caused by the multiple impacts of water droplets on ductile materials. The droplets were generated by using an ultrasonically excited pulsating water jet at pressures of 20 and 30 MPa for individual erosion time intervals from 1 to 20 s. The study was performed on two materials, i.e. AW-6060 aluminium alloy and AISI 304 stainless steel, to understand the role of different materials in droplet erosion. Erosion depth, width and volume removal were considered as responses with which to characterise the erosion evolution. The actual experimental response data were measured using a non-contact optical method, which was then used to train the prediction models. A high prediction accuracy between the predicted and observed data was obtained. With this approach, the erosion resistance of the material can be predicted, and, furthermore, the prediction of the progress from the incubation erosion stage to the terminal erosion stage can also be obtained.
Similar content being viewed by others
Availability of data and materials
Not applicable.
References
Vijay MM, Foldyna J, Remisz J. Ultrasonic modulation of high-speed water jets. In: Geomechanics, vol. 93. Taylor & Francis; 1994. p. 327–32.
Field JE. ELSI conference: invited lecture liquid impact—theory, experiment, applications. Wear. 1999;233–235:1–12. https://doi.org/10.1016/S0043-1648(99)00189-1.
Bowden FP, Brunton JH. Damage to solids by liquid impact at supersonic speeds. Nature. 1958;181:873–5.
Chlupová A, Hloch S, Nag A, Šulák I, Kruml T. Effect of pulsating water jet processing on erosion grooves and microstructure in the subsurface layer of 25CrMo4 (EA4T) steel. Wear. 2023;524–525: 204774. https://doi.org/10.1016/j.wear.2023.204774.
Adler WF. The mechanics of liquid impact. Acad Press, Treatise Mater Sci Technol. 1979;16:127–83.
Ibrahim ME, Medraj M. Water droplet erosion of wind turbine blades: mechanics, testing, modeling and future perspectives. Materials. 2020. https://doi.org/10.3390/ma13010157.
Nastic A, Vijay M, Tieu A, Jodoin B. High speed water droplet impact erosive behavior on dry and wet pulsed waterjet treated surfaces. Phys Fluids. 2023. https://doi.org/10.1063/5.0147698.
Siahpour P, Amegadzie MY, Tieu A, Donaldson IW, Plucknett KP. Ultrasonic pulsed waterjet peening of commercially-pure titanium. Surf Coat Technol. 2023;472: 129953. https://doi.org/10.1016/j.surfcoat.2023.129953.
Poloprudský J, Nag A, Kruml T, Hloch S. Effects of liquid droplet volume and impact frequency on the integrity of Al alloy AW2014 exposed to subsonic speeds of pulsating water jets. Wear. 2022;488–489: 204136. https://doi.org/10.1016/j.wear.2021.204136.
Honl M, Schwieger K, Carrero V, Rentzsch R, Dierk O, Dries S, Pude F, Bluhm A, Hille E, Louis H, Morlock M. The pulsed water jet for selective removal of bone cement during revision arthroplasty. Biomed Tech (Berl). 2003;48:275–80.
Baker DWC, Jolliffe KH, Pearson D, Jolliffet KH. The Resistance of Materials to Impact Erosion Damage Discussion on Deformation of Solids by the Impact of Liquids, and its Relation to Rain Damage in Aircraft and Missiles, to Blade Erosion in Steam Turbines, and to Cavitation Erosion XVI. The resistance of materials to impact erosion damage, 1966.
Fujisawa K. On erosion transition from the incubation stage to the accumulation stage in liquid impingement erosion. Wear. 2023;528–529: 204952. https://doi.org/10.1016/j.wear.2023.204952.
Thiruvengadam A, Rudy SL. NASA Contractor report. Experimental and analytical investigations on multiple liquid impact erosion, 2000.
Sapoval B. L’universalité des formes fractales dans la nature. Gazette Des Mathematiciens. pp 9–20, 2013.
Ahmad M, Schatz M, Casey MV. An empirical approach to predict droplet impact erosion in low-pressure stages of steam turbines. Wear. 2018;402–403:57–63. https://doi.org/10.1016/j.wear.2018.02.004.
Xie S, He Z, Loh YM, Yang Y, Liu K, Liu C, Cheung CF, Yu N, Wang C. A novel interpretable predictive model based on ensemble learning and differential evolution algorithm for surface roughness prediction in abrasive water jet polishing. J Intell Manuf. 2023. https://doi.org/10.1007/s10845-023-02175-4.
Ibrahim ME, Medraj M. Prediction and experimental evaluation of the threshold velocity in water droplet erosion. Mater Des. 2022. https://doi.org/10.1016/j.matdes.2021.110312.
Slot H, Matthews D, Schipper D, van der Heide E. Fatigue-based model for the droplet impingement erosion incubation period of metallic surfaces. Fatigue Fract Eng Mater Struct. 2021;44:199–211. https://doi.org/10.1111/ffe.13352.
Kirols HS, Kevorkov D, Uihlein A, Medraj M. Water droplet erosion of stainless steel steam turbine blades. Mater Res Express. 2017. https://doi.org/10.1088/2053-1591/aa7c70.
Zelenak M, Foldyna J, Scucka J, Hloch S, Riha Z. Visualisation and measurement of high-speed pulsating and continuous water jets. Measurement (Lond). 2015;72:1–8. https://doi.org/10.1016/j.measurement.2015.04.022.
Nag A, Stolárik G, Svehla B, Hloch S. Effect of water flow rate on operating frequency and power during acoustic chamber tuning. In: Advances in Manufacturing Engineering and Materials II: Proceedings of the International Conference on Manufacturing Engineering and Materials (ICMEM 2020), 21–25 June, 2021, Nový Smokovec, Slovakia, Springer, 2021. pp 142–154. https://doi.org/10.1007/978-3-030-71956-2.
Hloch S, Srivastava M, Nag A, Muller M, Hromasová M, Svobodová J, Kruml T, Chlupová A. Effect of pressure of pulsating water jet moving along stair trajectory on erosion depth, surface morphology and microhardness. Wear. 2020;452–453: 203278.
Pimenov DY, Bustillo A, Wojciechowski S, Sharma VS, Gupta MK, Kuntoğlu M. Artificial intelligence systems for tool condition monitoring in machining: analysis and critical review. J Intell Manuf. 2023;34:2079–121. https://doi.org/10.1007/s10845-022-01923-2.
González Rodríguez G, Gonzalez-Cava JM, Méndez Pérez JA. An intelligent decision support system for production planning based on machine learning. J Intell Manuf. 2020;31:1257–73. https://doi.org/10.1007/s10845-019-01510-y.
Cuartas M, Ruiz E, Ferreño D, Setién J, Arroyo V, Gutiérrez-Solana F. Machine learning algorithms for the prediction of non-metallic inclusions in steel wires for tire reinforcement. J Intell Manuf. 2021;32:1739–51. https://doi.org/10.1007/s10845-020-01623-9.
Kuo C-FJ, Tung C-P, Weng W-H. Applying the support vector machine with optimal parameter design into an automatic inspection system for classifying micro-defects on surfaces of light-emitting diode chips. J Intell Manuf. 2019;30:727–41. https://doi.org/10.1007/s10845-016-1275-1.
Pisner DA, Schnyer DM. Support vector machine. In: Machine learning: methods and applications to brain disorders. Elsevier; 2020. p. 101–21. https://doi.org/10.1016/B978-0-12-815739-8.00006-7.
Lehocka D, Klichova D, Foldyna J, Hloch S, Hvizdos P, Fides M, Botko M. Comparison of the influence of the acoustically enhanced pulsating water jet on selected surface integrity characteristics of CW004A copper and CW614N brass. Measurement. 2017;110:230–8. https://doi.org/10.1016/j.measurement.2017.07.005.
Funding
Grantová Agentura České Republiky, 23-05372S, Sergej Hloch.
Author information
Authors and Affiliations
Contributions
All authors contributed equally.
Corresponding authors
Ethics declarations
Conflict of interest
The authors declare that they have no competing interests.
Ethical approval and consent to participate
Not applicable.
Consent for publication
The consent to submit this paper has been received explicitly from all co-authors.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Nag, A., Gupta, M., Ross, N.S. et al. Real-time prediction and classification of erosion crater characteristics in pulsating water jet machining of different materials with machine learning models. Archiv.Civ.Mech.Eng 24, 97 (2024). https://doi.org/10.1007/s43452-024-00908-7
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s43452-024-00908-7