Distribution & Access For Publication Downloads News About Us Contact Us
Paper Titles
Application of SEM/TEM to Tests on Pt Distribution in Al2O3 Films Obtained by Oxidising FeCrAl Steel Foil Coated with Pt-Al Nanofilms
p.23
A Chemometric Study of Alumina/PEEK and Hydroxyapatite/PEEK Suspensions Prepared for Electrophoretic Deposition of Multifunctional Coatings
p.29
Effect of Methane Flow Rate on the Microstructural and Mechanical Properties of Silicon Carbide Thin Films Deposited by Reactive DC Magnetron Sputtering
p.35
ESR Study of Elements Added-DLC Films Deposited by PBII and RF-CVD Methods
p.41
Development of Advanced Coatings for ITER and Future Fusion Devices
p.47
Mechanical and Surface Properties of Chemical Vapor Deposited Protective Aluminium Oxide Films on TA6V Alloy
p.66
Oxidation Behavior of Thermal Barrier Coatings on Copper Substrates
p.74
Overview: How to Quantify the Capability of Yttrium Silicates to be Used as an Environmental Barrier Coating
p.80
Influence of Inorganic Sealant in Hot and Cold Erosive Wear in Plasma Sprayed Alumina Coating
p.86

Development of Advanced Coatings for ITER and Future Fusion Devices

Article Preview

Abstract:

Thermonuclear fusion is a potential source of cleaner and safer energy for the future. Its technological realization depends on the development of materials able to survive and function in extreme conditions, often involving a variety of loading – thermal, mechanical, chemical and irradiation. Single bulk materials are often at the edge of their properties limits; therefore, composites and coatings are intensely studied. This article reviews the development, characteristics and applications of coatings for fusion reactor materials. First, the technological objectives and material-environment interactions are briefly summarized, together with materials requirements and the role of coatings. Then, specific applications in different areas of a fusion device are reviewed, namely the plasma facing components, electrical insulation, diffusion and permeation barriers. Various coating fabrication methods are mentioned and the respective coating characteristics are compared. Selected case studies are presented, with particular focus given to ITER and to ceramic coatings.

You might also be interested in these eBooks
12th INTERNATIONAL CERAMICS CONGRESS PART E View Preview

Info:

Periodical:

Advances in Science and Technology (Volume 66)

Pages:

47-65

DOI:

https://doi.org/10.4028/www.scientific.net/AST.66.47

Citation:

Cite this paper

Online since:

October 2010

Authors:

Jiří Matějíček, Pavel Chráska

Keywords:

Bonding Interlayer, Breeding Blanket, Coating, Electrical Insulation, Fusion Material, Plasma Facing Component, Tiritum Permeation Barrier

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] G. McCracken and P. Stott: Fusion - The Energy of the Universe (Elsevier Academic Press, USA, 2005).

Google Scholar

[2] JET, http: /www. jet. efda. org.

Google Scholar

[3] ITER, http: /www. iter. org.

Google Scholar

[4] Fusion for Energy, http: /fusionforenergy. europa. eu.

Google Scholar

[5] H. Bolt, V. Barabash, W. Krauss, J. Linke, R. Neu, S. Sužuji and N. Yoshida: J. Nucl. Mater. Vol. 329 (2004), pp.66-73.

Google Scholar

[6] D. L. Smith, J. Konys, T. Muroga and V. Evitkhin: J. Nucl. Mater. Vol. 307 (2002), p.13141322.

Google Scholar

[7] J. Matějíček, P. Chráska and J. Linke: Journal of Thermal Spray Technology Vol. 16 (2007), pp.64-83.

DOI: 10.1007/s11666-006-9007-2

Google Scholar

[8] R. K. Janev, A. Miyahara: Nucl. Fusion Vol. 1 (1991), pp.123-138.

Google Scholar

[9] R. Matera, B. Federici: J. Nucl. Mater. Vol. 237 (1996), pp.17-25.

Google Scholar

[10] H. Bolt, V. Barabash, G. Federici, J. Linke, A. Loarte, J. Roth and K. Sato: J. Nucl. Mater. Vol. 307 (2002), pp.43-52.

DOI: 10.1016/s0022-3115(02)01175-3

Google Scholar

[11] K. Ioki, F. Elio, V. Barabash, V. Chuyanov, V. Rozov, X. Wang, J. Chen, L. Wang, P. Lorenzetto, A. Peacock, E. Enoeda, H. Nishi, B. G. Hong, Y. H. Jeong, A. Gervash, I. Mazul, T. Tanaka and M. Ulrickson: Fusion Eng. Des. Vol. 82 ( 2007), pp.1774-1780.

DOI: 10.1016/j.fusengdes.2007.02.013

Google Scholar

[12] T. Hirai, G. Pintsuk: Fusion Eng. Des. Vol. 82 (2007), pp.389-393.

Google Scholar

[13] R. W. Conn, R. P. Doerner and J. Won: Fusion Eng. Des. Vol. 37 (1997), pp.481-513.

Google Scholar

[14] V. Barabash, M. Akiba, I. Mazul, M. Ulrickson and G. Vieider: J. Nucl. Mater. Vol. 237 (1996), pp.718-723.

DOI: 10.1016/s0022-3115(96)00323-6

Google Scholar

[15] F. Scaffidi-Argentina, G. R. Longhurst, V. Shestakov and H. Kawamura: J. Nucl. Mater. Vol. 283 (2000), pp.43-51.

Google Scholar

[16] J. W. Davis, V. R. Barabash, A. Makhankov, L. Plöchl and K. T. Slattery: J. Nucl. Mater. Vol. 263 (1998), pp.308-312.

Google Scholar

[17] R. Mitteau, J. M. Missiaen, P. Brustolin, O. Ozer, A. Durocher, C. Ruset, C. P. Lungu, X. Courtois, C. Dominicy, H. Maier, C. Grisolia, G. Piazza and P. Chappuis: Fusion Eng. Des. Vol. 82 (2007), pp.1700-1705.

DOI: 10.1016/j.fusengdes.2007.01.003

Google Scholar

[18] V. Barabash, A. Peacock, S. Fabritsiev, G. Kalinin, S. Zinkle, A. Rowcliffe, J. W. Rensman, A. A. Tavassoli, P. Marmy, P. J. Karditsas, F. Gillemot, M. Akiba and Iter Int Team: J. Nucl. Mater. Vol. 367 (2007), pp.21-32.

DOI: 10.1016/j.jnucmat.2007.03.017

Google Scholar

[19] J. Pamela, G. F. Matthews, V. Philipps and R. Kamendje: J. Nucl. Mater. Vol. 363 ( 2007), pp.1-11.

Google Scholar

[20] H. Maier, R. Neu, H. Greuner, C. Hopf, G. F. Matthews, G. Piazza, T. Hirai, G. Counsell, X. Courtois, R. Mitteau, E. Gauthier, J. Likonen, G. Maddaluno, V. Philipps, B. Riccardi and C. Ruset: J. Nucl. Mater. Vol. 363 (2007), pp.1246-1250.

DOI: 10.1016/j.jnucmat.2007.01.246

Google Scholar

[21] G. F. Matthews, P. Coad, H. Greuner, M. Hill, T. Hirai, J. Likonen, H. Maier, M. Mayer, R. Neu, V. Philipps, R. Pitts, V. Riccardo and Jet Efda Contributors: J. Nucl. Mater. Vol. 390-91 (2009), pp.934-937.

DOI: 10.1016/j.jnucmat.2009.01.239

Google Scholar

[22] T. Hirai, J. Linke, M. Rubel, J. P. Coad, J. Likonen, C. P. Lungu, G. F. Matthews, V. Philipps and E. Wessel: Fusion Eng. Des. Vol. 83 (2008), pp.1072-1076.

DOI: 10.1016/j.fusengdes.2008.05.007

Google Scholar

[23] T. Hirai, H. Maier, M. Rubel, P. Mertens, R. Neu, E. Gauthier, J. Likonen, C. Lungu, G. Maddaluno, G. F. Matthews, R. Mitteau, O. Neubauer, G. Piazza, V. Philipps, B. Riccardi, C. Ruset and I. Uytdenhouwen: Fusion Eng. Des. Vol. 82 (2007).

DOI: 10.1088/0029-5515/47/3/009

Google Scholar

[24] R. Neu, C. Hopf, A. Kallenbach, T. Pütterich, R. Dux, H. Greuner, O. Gruber, A. Herrmann, K. Krieger, H. Maier and V. Rohde: J. Nucl. Mater. Vol. 367 (2007), pp.1497-1502.

DOI: 10.1016/j.jnucmat.2007.04.018

Google Scholar

[25] G. Piazza, G. F. Matthews, J. Pamela, H. Altmann, J. P. Coad, T. Hirai, A. Lioure, H. Maier, P. Mertens, V. Philipps, V. Riccardo, M. Rubel and E. Villedieu: J. Nucl. Mater. Vol. 367 (2007), pp.1438-1443.

DOI: 10.1016/j.jnucmat.2007.04.039

Google Scholar

[26] J. Matějíček, K. Neufuss, D. Kolman, O. Chumak and V. Brožek. Thermal Spray Connects: Explore Its Surfacing Potential! (Proc. International Thermal Spray Conference). DVS, Dusseldorf (2005), 634-640.

DOI: 10.31399/asm.cp.itsc2005p0634

Google Scholar

[27] S. Deschka, C. Garcia-Rosales, W. Hohenauer, R. Duwe, E. Gauthier, J. Linke, M. Lochter, W. Mallener, L. Plöchl, P. Rödhammer and A. Salito: J. Nucl. Mater. Vol. 237 (1996), p.645649.

DOI: 10.1016/s0022-3115(96)00090-6

Google Scholar

[28] X. Liu, S. Tamura, K. Tokunaga, N. Yoshida, N. Noda, L. Yang and Z. Xu: J. Nucl. Mater. Vol. 329-33 (2004), pp.687-691.

Google Scholar

[29] H. Greuner, H. Bolt, B. Boswirth, S. Lindig, W. Kühnlein, T. Huber, K. Sato and S. Suzuki: Fusion Eng. Des. Vol. 75-79 (2005), pp.333-338.

DOI: 10.1016/j.fusengdes.2005.06.240

Google Scholar

[30] K. Tokunaga, Y. Kubota, N. Noda, Y. Imamura, A. Kurumada, N. Yoshida, T. Sogabe, T. Kato and B. Schedler: Fusion Eng. Des. Vol. 81 (2006), pp.133-138.

DOI: 10.1016/j.fusengdes.2005.08.032

Google Scholar

[31] O. Kovářík, S. Xue, X. Fan and M. Boulos. Thermal Spray 2006: Building on 100 Years of Success (Proc. International Thermal Spray Conference). ASM International, (2006).

DOI: 10.31399/asm.cp.itsc2006p0373

Google Scholar

[32] S. Boire-Lavigne, C. Moreau and R. G. Saint-Jacques: Journal of Thermal Spray Technology Vol. 4 (1995), pp.261-267.

Google Scholar

[33] J. Matějíček, Koza Y. and Weinzettl V.: Fusion Eng. Des. Vol. 75-79 (2005), pp.395-399.

Google Scholar

[34] Y. Koza, E. Berthe, E. Lehmann, J. Linke, M. Rödig, E. Wessel and L. Singheiser: J. Nucl. Mater. Vol. 329-333 (2004), pp.706-710.

DOI: 10.1016/j.jnucmat.2004.04.187

Google Scholar

[35] J. Matějíček, V. Weinzettl, E. Dufková, V. Piffl and V. Peřina: Acta Technica CSAV Vol. 51 (2006), pp.179-191.

Google Scholar

[36] J. Matějíček, K. Iždinský and P. Vondrouš: Advanced Materials Research Vol. 59 (2009), pp.82-86.

Google Scholar

[37] Y. Zhang, Z. F. Chen, L. B. Wang, B. Yan, C. Li and D. Fang: Fusion Eng. Des. Vol. 84 (2009), pp.15-18.

Google Scholar

[38] F. Koch, S. Köppl and H. Bolt: J. Nucl. Mater. Vol. 386 (2009), pp.572-574.

Google Scholar

[39] A. Widdowson, M. J. Baldwin, J. P. Coad, R. P. Doerner, J. Hanna, D. E. Hole, G. F. Matthews, M. Rubel, R. Seraydarian and H. Xu: J. Nucl. Mater. Vol. 390-91 (2009), p.988991.

DOI: 10.1016/j.jnucmat.2009.01.259

Google Scholar

[40] E. Fortuna, M. J. Rubel, M. Psoda, M. Andrzejczuk, K. J. Kurzydlowski, M. Miskiewicz, V. Philipps, A. Pospieszczyk, G. Sergienko, M. Spychalski and W. Zielinski: Phys. Scr. Vol. T128 (2007), pp.162-165.

DOI: 10.1088/0031-8949/2007/t128/031

Google Scholar

[41] R. Neu, H. Maier, E. Gauthier, H. Greuner, T. Hirai, C. Hopf, J. Likonen, G. Maddaluno, G. F. Matthews, R. Mitteau, V. Philipps, G. Piazza and C. Ruset: Phys. Scr. Vol. T128 (2007), pp.150-156.

DOI: 10.1088/0031-8949/2007/t128/029

Google Scholar

[42] T. Hirai, N. Bekris, J. P. Coad, C. Grisolia, J. Linke, H. Maier, G. F. Matthews, V. Philipps and E. Wessel: J. Nucl. Mater. Vol. 392 (2009), pp.40-44.

DOI: 10.1016/j.jnucmat.2009.03.060

Google Scholar

[43] C. Gualco, M. Grattarola, A. Federici, F. Mataloni, K. Iždinský, F. Šimančík, B. Schwarz, C. Garcia-Rosales and I. Lopez-Galilea: Advanced Materials Research Vol. 59 (2009), p.192197.

DOI: 10.4028/www.scientific.net/amr.59.192

Google Scholar

[44] R. G. Castro, A. H. Bartlett, K. J. Hollis and R. D. Fields: Fusion Eng. Des. Vol. 37 (1997), pp.243-252.

Google Scholar

[45] K. J. Hollis, B. D. Bartram, M. Rödig, D. Youchison and R. Nygren: Journal of Thermal Spray Technology Vol. 16 (2007), pp.96-103.

Google Scholar

[46] R. G. Castro, K. E. Elliot, R. D. Watson, D. L. Youchison and K. T. Slattery: J. Nucl. Mater. Vol. 263 (1998), pp.252-257.

Google Scholar

[47] J. L. Chen, F. Gao, J. G. Li and Q. F. Fang: J. Nucl. Mater. Vol. 363 (2007), pp.1334-1339.

Google Scholar

[48] H. Bolt: Fusion Eng. Des. Vol. 22 (1993), pp.85-98.

Google Scholar

[49] J. Matějíček, K. Neufuss, P. Ctibor, P. Rohan, J. Dubský, P. Chráska and V. Brožek. Proceedings of International Thermal Spray Conference. DVS, Düsseldorf (2002), 1-5.

DOI: 10.31399/asm.cp.itsc2002p0001

Google Scholar

[50] O. I. Buzhinskij, Y. M. Semenets: Fusion Eng. Des. Vol. 45 (1999), pp.343-360.

Google Scholar

[51] H. Greuner et al.: J. Nucl. Mater. Vol. 329-333 (2004), pp.849-854.

Google Scholar

[52] J. E. Döring, R. Vassen, J. Linke and D. Stöver: J. Nucl. Mater. Vol. 307 (2002), pp.121-125.

Google Scholar

[53] J. Matějíček and P. Chráska, Report on Euratom task no. DV4/04 (TW0), Institute of Plasma Physics, Prague, (2000).

Google Scholar

[54] S. Nanobashvili, J. Matějíček, F. Žáček, J. Stöckel, P. Chráska and V. Brožek: J. Nucl. Mater. Vol. 307-311 (2002), pp.1334-1338.

DOI: 10.1016/s0022-3115(02)01281-3

Google Scholar

[55] C. P. Lungu, I. Mustata, V. Zaroschi, A. M. Lungu, A. Anghel, P. Chiru, M. Rubel, P. Coad and G. F. Matthews: Phys. Scr. Vol. T128 (2007), pp.157-161.

DOI: 10.1088/0031-8949/2007/t128/030

Google Scholar

[56] J. P. Coad, D. E. Hole, E. Kolodinska, J. Likonen, S. Lindig, G. F. Matthews, M. Mayer, V. Philipps, V. Riccardo and A. Widdowson: J. Nucl. Mater. Vol. 390-91 (2009), pp.992-995.

DOI: 10.1016/j.jnucmat.2009.01.260

Google Scholar

[57] B. C. Odegard, C. H. Cadden, R. D. Watson and K. T. Slattery: J. Nucl. Mater. Vol. 263 (1998), pp.329-334.

Google Scholar

[58] C. H. Cadden, B. C. Odegard: Fusion Eng. Des. Vol. 37 (1997), pp.287-298.

Google Scholar

[59] R. E. Nygren, D. L. Youchison, J. M. McDonald, T. J. Lutz, J. S. O'Dell, K. Ezato and K. Sato: Fusion Eng. Des. Vol. 66-68 (2003), pp.353-357.

DOI: 10.1016/s0920-3796(03)00211-4

Google Scholar

[60] F. L. Chong, J. L. Chen, J. G. Li, X. B. Zheng and C. X. Ding: Plasma Science & Technology Vol. 9 (2007), pp.261-264.

Google Scholar

[61] S. X. Song, Z. J. Zhou, J. Du and C. C. Ge: Mater. Sci. Forum Vol. 546-549 (2007), p.18091812.

Google Scholar

[62] G. Pintsuk, J. -E. Döring, W. Hohenauer, J. Linke, J. Matějíček, I. Smid and F. Tietz. World Congress on Powder Metallurgy & Particulate Materials (PM2TEC). Metal Powder Industries Federation, Princeton (2003), 6. 107 - 6. 118.

Google Scholar

[63] J. Matějíček, R. Mušálek. Thermal Spray Crossing Borders (Proc. Intl. Thermal Spray Conf. ). DVS Verlag, Dusseldorf, (2008), 1412-1417.

Google Scholar

[64] G. Pintsuk, I. Smid, J. E. Döring, W. Hohenauer and J. Linke: J. Mater. Sci. Vol. 42 (2007), pp.30-39.

Google Scholar

[65] K. T. Slattery and D. E. Driemeyer, US patent 5988488. (1999).

Google Scholar

[66] R. Montanari, B. Riccardi, R. Volterri and L. Bertamini: Mater. Lett. Vol. 52 (2002), p.100105.

Google Scholar

[67] J. Matějíček, H. Boldyryeva: Phys. Scr. Vol. T138 (2009), paper no. 014041.

DOI: 10.1088/0031-8949/2009/t138/014041

Google Scholar

[68] C. Ruset, E. Grigore, I. Munteanu, H. Maier, H. Greuner, C. Hopf, V. Philipps and G. Matthews: Fusion Eng. Des. Vol. 84 (2009), pp.1662-1665.

DOI: 10.1016/j.fusengdes.2008.11.053

Google Scholar

[69] A. Brendel, C. Popescu, H. Schurmann and H. Bolt: Surf. Coat. Technol. Vol. 200 (2005), pp.161-164.

Google Scholar

[70] T. Köck, A. Brendel and H. Bolt: J. Nucl. Mater. Vol. 362 (2007), pp.197-201.

Google Scholar

[71] A. Herrmann, M. Balden, M. Rasinski and H. Bolt: Advanced Materials Research Vol. 59 (2009), pp.198-203.

Google Scholar

[72] T. Schubert, A. Brendel, K. Schmid, T. Köck, L. Ciupinski, W. Zielinski, T. Weissgärber and B. Kieback: Composites Part A Vol. 38 (2007), pp.2398-2403.

Google Scholar

[73] P. Peters, J. Hemptenmacher and H. Schurmann: Mater. Sci. Forum Vol. 539-543 (2007), pp.931-935.

Google Scholar

[74] T. Köck, A. Herrmann, A. Brendel and H. Bolt: Advanced Materials Research Vol. 59 (2009), pp.138-142.

Google Scholar

[75] E. Neubauer, G. Kladler, C. Eisenmenger-Sittner, J. Hell, C. Prentice, P. Angerer and L. Ciupinski: Advanced Materials Research Vol. 59 (2009), pp.214-219.

DOI: 10.4028/www.scientific.net/amr.59.214

Google Scholar

[76] J. Du, T. Höschen, M. Rasinski and J. H. You : Mater. Sci. Eng. A Vol. 527 (2010), p.16231629.

Google Scholar

[77] T. Muroga, B. A. Pint: Fusion Eng. Des. (2010), doi: 10. 1016/j. fusengdes. 2010. 03. 025.

Google Scholar

[78] B. A. Pint: Mater. Sci. Forum Vol. 595-598 (2008), pp.549-558.

Google Scholar

[79] T. Terai: J. Nucl. Mater. Vol. 248 (1997), pp.153-158.

Google Scholar

[80] G. W. Hollenberg, E. P. Simonen, G. Kalinin and A. Terlain: Fusion Eng. Des. Vol. 28 (1995), pp.190-208.

DOI: 10.1016/0920-3796(95)90039-x

Google Scholar

[81] F. Koch, R. Brill, H. Maier, D. Levchuk, A. Suzuki, T. Muroga and H. Bolt: J. Nucl. Mater. Vol. 329 (2004), pp.1403-1406.

DOI: 10.1016/j.jnucmat.2004.04.206

Google Scholar

[82] A. Perujo, K. S. Forcey and T. Sample: J. Nucl. Mater. Vol. 207 (1993), pp.86-91.

Google Scholar

[83] A. Perujo, K. S. Forcey: Fusion Eng. Des. Vol. 28 (1995), pp.252-257.

Google Scholar

[84] A. Perujo, E. Serra, H. Kolbe and T. Sample: J. Nucl. Mater. Vol. 237 (1996), pp.1102-1106.

Google Scholar

[85] T. Sample, A. Perujo, H. Kolbe and B. Mancinelli: J. Nucl. Mater. Vol. 283 (2000), p.12721276.

Google Scholar

[86] H. Glasbrenner, J. Konys, Z. Voss and O. Wedemeyer: J. Nucl. Mater. Vol. 307-311 (2002), pp.1360-1363.

Google Scholar

[87] A. Aiello, A. Ciampichetti and G. Benamati: J. Nucl. Mater. Vol. 329 (2004), pp.1398-1402.

Google Scholar

[88] D. Levchuk, S. Levchuk, H. Maier, H. Bolt and A. Suzuki: J. Nucl. Mater. Vol. 367 (2007), pp.1033-1037.

Google Scholar

[89] M. Nakamichi, H. Nakamura, K. Hayashi and I. Takagi: J. Nucl. Mater. Vol. 386 (2009), pp.692-695.

Google Scholar

[90] A. Aiello, M. Utili, S. Scalia and G. Coccoluto: Fusion Eng. Des. Vol. 84 (2009), pp.385-389.

Google Scholar

[91] C. Kinoshita, S. J. Zinkle: J. Nucl. Mater. Vol. 237 (1996), pp.100-110.

Google Scholar

[92] A. Morono, E. R. Hodgson: Fusion Eng. Des. Vol. 75-79 (2005), pp.1075-1078.

Google Scholar

[93] H. Chen, T. Zhou, R. Lu, Z. Yang, Z. Wu and D. Xia: J. Nucl. Mater. Vol. 386 (2009), p.904907.

Google Scholar

[94] T. Terai, T. Yoneoka, H. Tanaka, A. Suzuki, S. Tanaka, M. Nakamichi, H. Kawamura, K. Miyajima and Y. Harada: J. Nucl. Mater. Vol. 237 (1996), pp.1421-1426.

DOI: 10.1016/s0022-3115(96)00257-7

Google Scholar

[95] M. Nakamichi, H. Kawamura, T. Terai and S. Tanaka: J. Nucl. Mater. Vol. 248 (1997), pp.165-169.

Google Scholar

[96] M. Nakamichi, T. Takabatake and H. Kawamura: Fusion Eng. Des. Vol. 41 (1998), pp.143-147.

Google Scholar

[97] M. Nakamichi, H. Kawamura: Fusion Eng. Des. Vol. 58-59 (2001), pp.719-723.

Google Scholar

[98] B. A. Pint, P. F. Tortorelli, A. Jankowski, J. Hayes, T. Muroga, A. Suzuki, O. I. Yeliseyeva and V. M. Chernov: J. Nucl. Mater. Vol. 329 (2004), pp.119-124.

DOI: 10.1016/j.jnucmat.2004.04.010

Google Scholar

[99] B. A. Pint, J. L. Moser and P. F. Tortorelli : J. Nucl. Mater. Vol. 367 (2007), pp.1150-1154.

Google Scholar

[100] A. Sawada, A. Suzuki and T. Terai: Fusion Eng. Des. Vol. 81 (2006), pp.579-582.

Google Scholar

[101] B. A. Pint, S. J. Pawel, M. Howell, J. L. Moser, G. W. Garner, M. L. Santella, P. F. Tortorelli, F. W. Wiffen and J. R. DiStefano: J. Nucl. Mater. Vol. 386 (2009), pp.712-715.

DOI: 10.1016/j.jnucmat.2008.12.295

Google Scholar

[102] F. Elio, ITER IT Garching, personal communication (2004).

Google Scholar

[103] L. F. Moreschi, P. Rossi, M. Agostini, S. Storai and A. T. Peacock: Fusion Eng. Des. Vol. 69 (2003), pp.303-307.

DOI: 10.1016/s0920-3796(03)00359-4

Google Scholar

[104] H. J. Kim, S. Odoul, C. H. Lee and Y. G. Kweon: Surf. Coat. Technol. Vol. 140 (2001), pp.293-301.

Google Scholar

[105] R. Vila, E. R. Hodgson: J. Nucl. Mater. Vol. 386 (2009), pp.1041-1044.

Google Scholar

Scientific.Net is a registered brand of Trans Tech Publications Ltd
© 2024 by Trans Tech Publications Ltd. All Rights Reserved