Number of the records: 1
Stereolithography for manufacturing of advanced porous solids
- 1.0576179 - ÚTAM 2024 RIV CZ eng C - Conference Paper (international conference)
Drechslerová, V. - Neuhäuserová, M. - Falta, J. - Šleichrt, J. - Kytýř, Daniel
Stereolithography for manufacturing of advanced porous solids.
Acta Polytechnica CTU Proceedings. Vol. 41. Prague: Czech Technical University in Prague, 2023 - (Nouzovský, L.; Drábek, M.; Richter, P.; Růžička, J.), s. 1-7. ISBN 978-80-01-07224-0. E-ISSN 2336-5382.
[Young Transportation Engineers Conference. Prague (CZ), 24.11.2022-24.11.2022]
R&D Projects: GA MŠMT(CZ) EF16_019/0000766
Institutional support: RVO:68378297
Keywords : stereolithography * advanced porous materials * quasi-static testing * resin * mechanical characteristics
OECD category: Materials engineering
https://doi.org/10.14311/APP.2023.41.0001
The aim of this paper is focused on benefits of stereolithography (SLA) technology for the fabrication of the lightweight lattice structures with potential for load-bearing function and high absorption of impact energy. SLA is an additive manufacturing technology employing the principle of liquid resins curing moderated by radiation of a wavelength from ultra-violet band where resulting material parameters are tunable by setting of the curing process. The batches of samples manufactured using three different resins were subjected to quasi-static uni-axial tensile and compression tests. Acquired data were processed to derive deformation behaviour expressed as stress-strain diagrams and fundamental material properties. Based on the knowledge obtained from the mechanical tests, the setup of the fabrication parameters, the most suitable resin for manufacturing of the lattice structures and the overall suitability of SLA technology for the fabrication of advanced porous materials, were determined.
Permanent Link: https://hdl.handle.net/11104/0345774
Number of the records: 1