Number of the records: 1
Hydrogen embrittlement of the additively manufactured high-strength X3NiCoMoTi 18-9-5 maraging steel
- 1.0546220 - FZÚ 2022 RIV CH eng J - Journal Article
Strakošová, A. - Roudnická, Michaela - Ekrt, Ondřej - Vojtěch, D. - Michalcová, A.
Hydrogen embrittlement of the additively manufactured high-strength X3NiCoMoTi 18-9-5 maraging steel.
Materials. Roč. 14, č. 17 (2021), č. článku 5073. E-ISSN 1996-1944
Institutional support: RVO:68378271
Keywords : maraging steel * selective laser melting * hydrogen embrittlement * hydrogen-induced cracking
OECD category: Condensed matter physics (including formerly solid state physics, supercond.)
Impact factor: 3.748, year: 2021
Method of publishing: Open access
The main aim of this study was to determine the susceptibility of the additively manufactured high strength X3NiCoMoTi 18-9-5 maraging steel to hydrogen embrittlement. For this purpose, samples produced by selective laser melting technology, before and after heat treatment, were used. The examined samples were electrochemically charged with hydrogen in NaCl + NH4SCN solution at a current density of 50 mA/cm2 for 24 h. The H content increased from about 1 to 15 ppm. Heat treatment did not affect the amount of H trapped in the maraging steel. Tensile testing revealed that the tensile strength of the H-charged samples was much lower than that of the uncharged samples. Moreover, the material became brittle after charging compared to the ductile as-printed and heat-treated samples with elongation values of 7% and 2%, respectively. The loss of plasticity was confirmed by fractography.
Permanent Link: http://hdl.handle.net/11104/0322798
File Download Size Commentary Version Access 0546220.pdf 2 2.5 MB CC Licence Publisher’s postprint open-access
Number of the records: 1