Number of the records: 1
Amorphous nanosized Al–Ti–Mn trimetal hydrous oxides: synthesis, characterization and enhanced performance in arsenic removal
- 1.
SYSNO ASEP 0464673 Document Type J - Journal Article R&D Document Type Journal Article Subsidiary J Článek ve WOS Title Amorphous nanosized Al–Ti–Mn trimetal hydrous oxides: synthesis, characterization and enhanced performance in arsenic removal Author(s) Thanh, D. N. (CZ)
Bastl, Zdeněk (UFCH-W) RID, ORCID
Černá, K. (CZ)
Ulbrich, P. (CZ)
Lederer, J. (CZ)Source Title RSC Advances. - : Royal Society of Chemistry
Roč. 6, č. 103 (2016), s. 100732-100742Number of pages 11 s. Language eng - English Country GB - United Kingdom Keywords RAY PHOTOELECTRON-SPECTROSCOPY ; BINARY MIXED-OXIDE ; Al-Ti-Mn trimetal hydrous oxides ; AQUEOUS-SOLUTION Subject RIV CF - Physical ; Theoretical Chemistry Institutional support UFCH-W - RVO:61388955 UT WOS 000387427700011 EID SCOPUS 84994013376 DOI 10.1039/C6RA11347H Annotation Arsenite (As(III)) is more toxic and more difficult to remove from water than arsenate (As(V)). There is no simple treatment for direct efficient removal of As(III), and thus pre-oxidation of As(III) to As(V) is always required to achieve acceptable removal rates. However, this leads to a complicated operation, which is not cost-effective. To overcome these disadvantages, we have developed a novel nanosized Al–Ti–Mn trimetal hydrous oxide (ATM) adsorbent material combining the oxidation properties of manganese dioxide and the high capacity of aluminium hydrous oxide and titanium hydrous oxide to adsorb As(V). This was done by applying a method based on simultaneous oxidation and precipitation. The adsorbent was characterized by BET surface area measurement, as well as XRD, TEM, XPS, FTIR and TGA techniques. The characterization provided evidence that the new adsorbent was amorphous, had a relatively high surface area (71 m2 g−1) and consisted of aggregates of many nanosized particles. Laboratory experiments were carried out to investigate the adsorption kinetics, the adsorption capacity of the adsorbent and the effect of the pH of the solution on the overall arsenic removal. The results indicated that the ATM adsorbent performed excellently in removing both As(III) and As(V) from water. The maximum adsorption capacities for As(III) and As(V) calculated from the Langmuir model are 202.7 and 146.7 mg g−1 (pH 7.0), and 193.3 and 158.6 mg g−1 (pH 5.0), respectively. These values exceed significantly those reported in the literature for other nano-adsorbents. Furthermore, the result of XPS analysis of the adsorbent before and after interaction with As(III) confirmed the oxidation/adsorption mechanism for As(III) uptake by ATM. Workplace J. Heyrovsky Institute of Physical Chemistry Contact Michaela Knapová, michaela.knapova@jh-inst.cas.cz, Tel.: 266 053 196 Year of Publishing 2017
Number of the records: 1