Number of the records: 1
INFLUENCE OF THE DEPOSITION PARAMETERS ON MICROSTRUCTURE AND PROPERTIES OF HVOF SPRAYED WC-CRC-NI COATING
- 1.
SYSNO ASEP 0579049 Document Type C - Proceedings Paper (int. conf.) R&D Document Type Conference Paper Title INFLUENCE OF THE DEPOSITION PARAMETERS ON MICROSTRUCTURE AND PROPERTIES OF HVOF SPRAYED WC-CRC-NI COATING Author(s) Vražina, Tomáš (UFM-A)
Šulák, Ivo (UFM-A) ORCID
Poloprudský, Jakub (UFM-A) ORCID
Zábranský, K. (CZ)
Gejdoš, P. (CZ)
Hadraba, Hynek (UFM-A) RID, ORCID
Čelko, L. (CZ)Number of authors 7 Source Title METAL 2022. 31st International Conference on Metallurgy and Materials. Conference Proceedings. - Ostrava : TANGER, 2022 - ISSN 2694-9296 - ISBN 978-80-88365-06-8 Pages (2022), s. 487-492 Number of pages 6 s. Publication form Print - P Action METAL 2022 - International Conference on Metallurgy and Materials /31./ Event date 18.05.2022 - 19.05.2022 VEvent location Brno Country CZ - Czech Republic Event type WRD Language eng - English Country CZ - Czech Republic Keywords hvof ; microhardness ; WC-CrC-Ni Subject RIV JG - Metallurgy OECD category Materials engineering Institutional support UFM-A - RVO:68081723 EID SCOPUS 85144127497 DOI 10.37904/metal.2022.4421 Annotation This paper investigates the influence of thermal spray parameters of the high-velocity oxygen fuel (HVOF) process on the properties of cermet coatings prepared from commercially available Amperit 551 WC-CrC-Ni powder. Three different processing parameters were applied to optimize the production process with the aim to achieve preeminent mechanical properties and fully dense material without microstructural defects. The deposition was carried out by a GLC5 gun. The velocity and temperature of powder particles in the spray stream were monitored by Accuraspray Tecnar diagnostic tool. The quality of deposited coatings was analyzed by means of light microscopy, scanning electron microscopy, and X-ray diffraction. The chemical composition of the used powder and sprayed WC-CrC-Ni coating was determined by energy dispersive spectroscopy. It was found that the spray parameters have a negligible effect on the resulting microstructure and phase composition of the coating. However, the porosity and surface roughness were significantly affected by the variation in process parameters. To assess the basic mechanical properties of HVOF sprayed coating instrumented Vickers hardness measurements were utilized. The coating hardness reached mean values over 1400 HV 0.1 and the indentation modulus varied from 152-279 GPa. Workplace Institute of Physics of Materials Contact Yvonna Šrámková, sramkova@ipm.cz, Tel.: 532 290 485 Year of Publishing 2025
Number of the records: 1