The Numerical Identification of Basins of Attraction for the Vibration Response of the Rigid Rotor with Squeeze Film Dampers

0578111 - ÚT 2024 RIV CH eng J - Journal Article
Molčan, M. - Ferfecki, P. - Zapoměl, Jaroslav
The Numerical Identification of Basins of Attraction for the Vibration Response of the Rigid Rotor with Squeeze Film Dampers.
Applied Sciences-Basel. Roč. 13, č. 5 (2023), č. článku 2864. E-ISSN 2076-3417
Institutional support: RVO:61388998
Keywords : rigid rotor * short squeeze film damper * vibration stability analysis * basins of attraction * origination of nonsynchronous response
OECD category: Applied mechanics
Impact factor: 2.7, year: 2022
Method of publishing: Open access
https://www.mdpi.com/2076-3417/13/5/2864

The article deals with the computational study of the rigid rotor coupled with squeeze film dampers. Various techniques such as the method of computation of the synchronous response with a circular centred orbit, the harmonic balance method, and the direct time integration method are used to analyse the nonlinear behaviour of the rotor system. The results indicate that the rotor system can exhibit both a synchronous circular response with a large orbit radius and a nonsynchronous response with a quasiperiodic character. However, both responses are undesirable in rotating machinery and should be avoided. The new results are presented to provide insight into the impact of initial conditions on the vibration response via basins of attraction. The simulations show that: (i) the basins of attraction are more sensitive to the choice of the initial velocities than displacements, (ii) the basins of attraction are noticeably dependent on the rotor speed in the region of a nonsynchronous response, and (iii) the border between the basins of attraction can be smooth or without a clear structure. The research brings clear conditions defined by parameters such as the dimensionless SFD constant, unbalance, and rotational speed for the suppression of undesirable nonlinear phenomena. The results suggest that the damper can effectively improve the vibration response of high-speed rotating machinery, but its design must be chosen appropriately.
Permanent Link: https://hdl.handle.net/11104/0348051