Variation of structured laser beam pattern and optimization for an alignment reference line creation

0584155 - ÚFP 2024 RIV US eng J - Journal Article
Niewiem, W. - Polák, K. - Dušek, M. - Mergelkuhl, D. - Gayde, J.Ch. - Wieser, A. - Šulc, Miroslav
Variation of structured laser beam pattern and optimization for an alignment reference line creation.
Optics Express. Roč. 31, č. 26 (2023), s. 43307-43322. ISSN 1094-4087
Institutional support: RVO:61389021
Keywords : structured laser beam * alignment * inner core
OECD category: Optics (including laser optics and quantum optics)
Impact factor: 3.8, year: 2022
Method of publishing: Open access
https://opg.optica.org/oe/fulltext.cfm?uri=oe-31-26-43307&id=544211

The alignment of particle accelerators demands a dedicated measurement system based on a straight-line reference. This straight line can be provided by a laser beam. The alignment then involves accurately measuring the offset of accelerator components with respect to this light path. In order to be efficient, the laser beam needs to serve as a stable and straight reference for distances of several hundreds of meters. The attainable accuracy depends, among other parameters, on the laser spot size, which should ideally change very little over the distances at which the alignment system needs to operate. Due to the significant divergence of Gaussian laser beams, we propose using a structured laser beam (SLB) for alignment. Its transversal intensity profile is similar to a Bessel beam and consists of an intense inner core (IC) and concentric rings. The divergence of the IC, i.e., the growth of its size with distance, can be limited to 10 µrad using a favorable generator configuration. Thus an SLB may be suitable as a straight-line reference for long-distance alignment applications. However, the SLB is distorted if obstructions cover parts of the outermost ring (OR) of the beam within, which should therefore also be small. In this paper, we investigate the relationship between the size of the IC and OR depending on the design parameters of the SLB generator. We use numerical simulations and experiments with different generators over distances up to 50 m to analyze the transversal intensity profile and wavefronts of different SLBs. The results indicate the general suitability of an SLB as a reference line for long-distance alignment but also expose tradeoffs between small IC and small OR. The findings outlined in the paper help to describe the optimal SLB parameters for given conditions.
Permanent Link: https://hdl.handle.net/11104/0352143