Number of the records: 1  

Porous pseudo-substrates for InGaN quantum well growth: Morphology, structure, and strain relaxation

  1. 1.
    0576333 - ÚFM 2024 RIV US eng J - Journal Article
    Ji, Y. - Frentrup, M. - Zhang, X. - Pongrácz, Jakub - Fairclough, S. M. - Liu, Y. - Zhu, T. - Oliver, Rachel A.
    Porous pseudo-substrates for InGaN quantum well growth: Morphology, structure, and strain relaxation.
    Journal of Applied Physics. Roč. 134, č. 14 (2023), č. článku 145102. ISSN 0021-8979. E-ISSN 1089-7550
    Institutional support: RVO:68081723
    Keywords : InGaN * MQW * porosification * AFM * XRD * strain relaxation
    OECD category: Condensed matter physics (including formerly solid state physics, supercond.)
    Impact factor: 2.7, year: 2023 ; AIS: 0.579, rok: 2023
    Method of publishing: Open access
    Result website:
    https://pubs.aip.org/aip/jap/article/134/14/145102/2916034/Porous-pseudo-substrates-for-InGaN-quantum-wellDOI: https://doi.org/10.1063/5.0165066

    Strain-related piezoelectric polarization is detrimental to the radiative recombination efficiency for InGaN-based long wavelength micro LEDs. In this paper, partial strain relaxation of InGaN multiple quantum wells (MQWs) on the wafer scale has been demonstrated by adopt ing a partially relaxed InGaN superlattice (SL) as the pseudo-substrate. Such a pseudo-substrate was obtained through an electro-chemical
    etching method, in which a sub-surface InGaN/InGaN superlattice was etched via threading dislocations acting as etching channels. The
    degree of strain relaxation in MQWs was studied by x-ray reciprocal space mapping, which shows an increase of the in-plane lattice constant
    with the increase of etching voltage used in fabricating the pseudo-substrate. The reduced strain in the InGaN SL pseudo-substrate was dem onstrated to be transferable to InGaN MQWs grown on top of it, and the engineering of the degree of strain relaxation via porosification
    was achieved. The highest relaxation degree of 44.7% was achieved in the sample with the porous InGaN SL template etched under the
    highest etching voltage. Morphological and structural properties of partially relaxed InGaN MQWs samples were investigated with the com bination of atomic force and transmission electron microscopy. The increased porosity of the InGaN SL template and the newly formed
    small V-pits during QW growth are suggested as possible origins for the increased strain relaxation of InGaN MQWs.
    Permanent Link: https://hdl.handle.net/11104/0345962
     
Number of the records: 1  

  This site uses cookies to make them easier to browse. Learn more about how we use cookies.