0569796 - ÚCHP 2023 RIV IT eng C - Conference Paper (international conference)
Muñiz Sierra, Héctor - Šyc, Michal - Zach, Boleslav - Shtukaturova, Anastasia - Korotenko, Ekaterina
The use of wet magnetic separation technology and liberation processes for the improvement of the copper concentrate product obtained by gravimetric concentration treatment from the fine fraction of incineration bottom ash.
Proceedings SUM2022. Padova: CISA Publisher, 2022. ISBN N.
[SUM 2022 - 6th Symposium on Circular Economy and Urban Mining. Capri (IT), 18.05.2022-20.05.2022]
R&D Projects: GA TA ČR(CZ) TH72020002; GA MŠMT(CZ) EF16_026/0008413
Institutional support: RVO:67985858
Keywords : copper * wet low-intensity magnet separator * wet shaker table * incineration bottom ash
OECD category: Mining and mineral processing

In 2020, the European Union incinerated more than 61 million tonnes of municipal solid waste (MSW). The incineration technology is a common way to manage the MSW in which the ashes generated have been proved suitable as construction material and as a secondary source of valuable elements. Among the different recovery methods, gravimetric concentration treatments are a common practice for heavy metals recovery in the incineration bottom ash. It is also common in the finest fraction. This research studies the feasibility of using wet magnetic concentrator devices as a complementary treatment for the over-concentration of copper in the dense product obtained after gravimetric treatment by wet shaker table. In addition, a liberation treatment of this metal by milling and selective sieving is presented. Results showed that the use of magnetic separators increased the grade of copper by more than 60 % without any significant loss of copper. In addition, the proposed liberation treatment for the dense magnetic product obtained good results, achieving an increment of 2% wt. in copper recovery after three minutes of milling. The results obtained for the non-magnetic product were not satisfactory however, the optimization of several parameters is proposed to improve the treatment efficiency.
Permanent Link: https://hdl.handle.net/11104/0341130