Number of the records: 1
Charpy zkoušky materiálu ČSN 19 312 siloměrného čepu
- 1.0561915 - ÚTAM 2023 RIV CZ cze V - Research Report
Šperl, Martin - Gajdoš, Lubomír - Bejdl, Jan
Charpy zkoušky materiálu ČSN 19 312 siloměrného čepu.
[Charpy tests of load measuring pins from ČSN 19 312 material.]
Praha: STROS-Sedlčanské strojírny, a.s., 2022. 5 s.
Institutional support: RVO:68378297
Keywords : load-measuring pins * impact test * Charpy method * low temperature
OECD category: Applied mechanics
Charpyho zkoušky zátěžových měřicích trnů z oceli ČSN 19312 byly provedeny při teplotě 20 °C, 0 °C, -20 °C, popř.
-40 °C s cílem ověřit, že Charpyho vrubová houževnatost kolíků si zachovává svou průměrnou hodnotu i při -40 °C. Výsledky ukázaly, že ocel nevykazuje typickou tranzitní křivku typu S v teplotním rozsahu 20 °C ÷ -40 °C, díky čemuž se vrubová houževnatost podle Charpyho při -40 °C prakticky nelišila od vrubové houževnatosti při vyšších teplotách.
Charpy tests of load measuring pins from ČSN 19312 steel were carried out at the temperature 20 °C, 0 °C, -20 °C, and
-40 °C with the aim to verify that Charpy notch toughness of the pins keeps its average magnitude even at -40 °C. The results showed that the steel did not exhibit a typical S-type transit curve in the temperature range 20 °C ÷ -40 °C due to which the Charpy notch toughness at -40 °C practically did not differ from that at higher temperatures.
Permanent Link: https://hdl.handle.net/11104/0334336
Number of the records: 1