0559856 - ÚCHP 2023 RIV CH eng J - Journal Article
Kronusová, O. - Kaštánek, P. - Koyun, G. - Kaštánek, František - Brányik, T.
Factors Influencing the Production of Extracellular Polysaccharides by the Green Algae Dictyosphaerium chlorelloides and Their Isolation, Purification, and Composition.
Microorganisms. Roč. 10, č. 7 (2022), č. článku 1473. ISSN 2076-2607. E-ISSN 2076-2607
Institutional support: RVO:67985858
Keywords : dictyosphaerium chlorelloides * extracellular polysaccharides * photobioreactor
OECD category: Chemical process engineering
Impact factor: 4.5, year: 2022
Method of publishing: Open access
Result website:
https://www.mdpi.com/2076-2607/10/7/1473/htm
DOI: https://doi.org/10.3390/microorganisms10071473

The freshwater green microalgae, Dictyosphaerium chlorelloides (CCALA 330), has the ability to produce extracellular polysaccharides (EPS). Conditions for optimum growth and EPS overproduction were determined in laboratory-scale tubular photobioreactors (PBR) with a working volume of 300 mL. Multiple limitations in nutrient supply were proven to be an effective method for EPS overproduction. Salinity stress was also applied to the culture, but no significant increase in EPS production was observed. The effects of different nitrogen sources were examined and the microalgae exhibited the fastest growth and EPS production in medium containing ammonium nitrate. Under determined optimal conditions, EPS concentration reached 10 g/L (71% of the total biomass) and a total biomass of 14 g/L at the end of 17 days cultivation. Pilot-scale cultivation was also carried out in a column type airlift photobioreactor (PBR) with a working volume of 60 L. A new and efficient methodology was developed for separating cells from the EPS-containing culture broth. Due to the strong attachment between cells and EPS, high-pressure homogenization was carried out before a centrifugation process. The EPS in the supernatant was subsequently purified using ultrafiltration. The green microalgae Dictyosphaerium chlorelloides may therefore be appropriate for the commercial production of EPS.

Permanent Link: https://hdl.handle.net/11104/0333036