Ion sputtering for preparation of thin MAX and MXene phases

0523928 - ÚJF 2021 RIV GB eng J - Journal Article
Vacík, Jiří - Horák, Pavel - Bakardjieva, Snejana - Bejšovec, Václav - Ceccio, Giovanni - Cannavó, Antonino - Torrisi, Alfio - Lavrentiev, Vasyl - Klie, R.
Ion sputtering for preparation of thin MAX and MXene phases.
Radiation Effects and Defects in Solids. Roč. 175, 1-2 (2020), s. 177-189. ISSN 1042-0150. E-ISSN 1029-4953
R&D Projects: GA ČR(CZ) GA18-21677S
Institutional support: RVO:61389005 ; RVO:61388980
Keywords : ion beam sputtering * low energy ion facility * thin films * MAX and MXenes phases
OECD category: Condensed matter physics (including formerly solid state physics, supercond.); Inorganic and nuclear chemistry (UACH-T)
Impact factor: 1.141, year: 2020
Method of publishing: Limited access
https://doi.org/10.1080/10420150.2020.1718142

Thin films of MAX and MXene phases were prepared by ion beam sputtering followed by thermal annealing in vacuum. For this purpose, a Low Energy Ion Facility (LEIF) using heavy ions for target irradiation was developed, and the DC ion beam sputtering method was implemented. The process for preparing MAX and MXene thin composites consists of two steps. First step: bombarding the elemental targets with low-energy ions (either all targets together, each with the corresponding size, or each target separately and repeatedly), it results in synthesis of either homogeneous layers of mixed phases or multilayer arrays of individual phases. Second step: thermal annealing under vacuum with a suitable temperature and time to induce a diffusion process, mutual phase interaction and finally the formation of MAX or MXene composites with the desired structure. After installation of the LEIF system and the introduction of the two-step method, i.e. DC ion sputtering with subsequent thermal processing, the first Ti-based MAX and MXene carbides, Ti2SnC and Ti2C, in thin films of composites were prepared and analyzed.
Permanent Link: http://hdl.handle.net/11104/0308218