Production of Superplastic Ti-6Al-7Nb Alloy Using High-Pressure Sliding Process

0511894 - ÚFM 2020 RIV JP eng J - Journal Article
Watanabe, K. - Ashida, M. - Masuda, T. - Král, Petr - Takizawa, Y. - Yumoto, M. - Otagiri, Y. - Sklenička, Václav - Hanawa, T. - Horita, Z.
Production of Superplastic Ti-6Al-7Nb Alloy Using High-Pressure Sliding Process.
Materials Transactions. Roč. 60, č. 9 (2019), s. 1785-1791. ISSN 1345-9678. E-ISSN 1347-5320.
[World Conference on Titanium /14./. Nantes, 10.06.2019-14.06.2019]
Institutional support: RVO:68081723
Keywords : severe plastic deformation * grain refinement * superplasticity * grain boundary sliding * titanium alloy
OECD category: Materials engineering
Impact factor: 0.731, year: 2019
Method of publishing: Limited access
https://www.jstage.jst.go.jp/article/matertrans/60/9/60_ME201924/_html/-char/en

A Ti-6Al-7Nb alloy was processed by severe plastic deformation through high-pressure sliding (HPS) at room temperature for grain refinement. The microstructure consists of grains with sizes of 200-300nm in diameter having high and low angles boundaries. Superplasticity appeared with the total elongation of more than 400% and this was more likely when the tensile specimen is deformed in the direction parallel than perpendicular to the sliding direction. However, the superplastic elongation is almost the same irrespective of whether the sliding was made in the single direction or in the reversible directions as far as the total sliding distance is the same. The total elongation is invariably higher for the tensile testing at 1123K than at the other temperatures, reaching the highest elongation of 790% at the initial strain rate of 1 x 10(-3) s(-1). The strain rate sensitivity and the activation energy for the deformation were determined to be more than similar to 0.3 and 199 kJ/mol, respectively. The microstructural observation reveals that the alpha phase region covers more than 85% of the tensile specimens after deformation and their grains are equiaxed in shape. It is concluded that the superplastic deformation is mainly controlled by grain boundary sliding through thermally activation by lattice diffusion.
Permanent Link: http://hdl.handle.net/11104/0302295