Numerical analysis of self-centering energy dissipation brace with arc steel plate for seismic resistance

0506882 - ÚTAM 2020 RIV NL eng J - Journal Article
Huang, H. - Zhang, F. - Zhang, Wei - Guo, M. - Urushadze, Shota - Wu, G.
Numerical analysis of self-centering energy dissipation brace with arc steel plate for seismic resistance.
Soil dynamics and earthquake engineering. Roč. 125, October (2019), č. článku 105751. ISSN 0267-7261. E-ISSN 1879-341X
Institutional support: RVO:68378297
Keywords : arc steel plate * self-centering energy dissipation brace * disc spring * finite element simulation * internal force calculation
OECD category: Construction engineering, Municipal and structural engineering
Impact factor: 2.637, year: 2019
Method of publishing: Limited access
https://doi.org/10.1016/j.soildyn.2019.105751

A self-centering energy dissipation brace (SEDB) with an arc steel plate was designed to improve the seismic performance of a structure and reduce the residual structural deformation after an earthquake. Seven groups of self-centering energy dissipation brace models of arc steel plates with different configurations were established based on ABAQUS software. A method for calculating the internal forces, stiffness, yield displacement and yield load of a brace was derived and shows agreement with theoretical values. This brace shows a favorable hysteretic performance that corresponds to its full, flag-shaped hysteretic curve. The stiffness transition of various stages is smooth and stable. The maximum residual deformation of the component is 3.75mm and decreases as prepressing of the disc springs is increased. The component's reset performance can be fully utilized to satisfy specific needs. The advised values for designing the energy dissipation components of an arc steel plate are described as follows: 1/250 of a radian, width of 50–80mm and thickness of 20 mm. The damping force, damping displacement and brace stiffness of the SEDB can be adjusted by the structural parameters of the arc steel plate to satisfy the engineering requirements
Permanent Link: http://hdl.handle.net/11104/0298012