Microstructure and sliding wear properties of HVOF sprayed, laser remelted and laser clad Stellite 6 coatings

0476973 - ÚFP 2018 RIV CH eng J - Journal Article
Houdková, Š. - Pala, Zdeněk - Smazalová, E. - Vostřák, M. - Česánek, Z.
Microstructure and sliding wear properties of HVOF sprayed, laser remelted and laser clad Stellite 6 coatings.
Surface and Coatings Technology. Roč. 318, May (2017), s. 129-141. ISSN 0257-8972.
[International Meeting on Thermal Spraying (RIPT)/7./. Limoges, 09.12.2015-11.12.2015]
Institutional support: RVO:61389021
Keywords : Stellite 6 * HVOF * Laser remelting * Laser clad * Wear * Phase transformation
OECD category: Coating and films
Impact factor: 2.906, year: 2017
http://www.sciencedirect.com/science/article/pii/S0257897216308817

The microstructure and sliding wear properties of Co-Cr-W alloy (Stellite 6) coatings were studied in the dependence on the deposition technology. The HVOF as-sprayed, laser remelted HVOF sprayed and laser clad coatings were evaluated by SEM, XRD and ASTM G-133 reciprocating sliding wear test. In dependence on used deposition technology, the microstructure of coating varied namely in terms of grain size and phase composition. The XRD analyses in the wear track revealed that the strain-induced fcc-to-hcp transformation is taking part during wear of laser remelted HVOF sprayed coatings. The difference of the phase composition, grain size and strain-induced fcc-to-hcp transformation was shown to be responsible for differences in the sliding wear behaviour.
Permanent Link: http://hdl.handle.net/11104/0273419