Výsledky vyhledávání
- 1.0603586 - FZÚ 2025 RIV NL eng J - Článek v odborném periodiku
Pathak, Sunil - Stránský, Ondřej - Šmaus, Jan - Kopeček, Jaromír - Narayanan, J.A. - Kaufman, Jan - Beránek, L. - Böhm, Marek - Brajer, Jan - Mocek, Tomáš
Influence on micro-geometry and surface characteristics of laser powder bed fusion built 17-4 PH miniature spur gears in laser shock peening.
Advances in Industrial and Manufacturing Engineering. Roč. 9, Nov (2024), č. článku 100151. ISSN 2666-9129. E-ISSN 2666-9129
Grant CEP: GA MŠMT(CZ) EH22_008/0004573; GA MŠMT LM2023051
Institucionální podpora: RVO:68378271
Klíčová slova: LPBF * laser shock peening * gear * microgeomtery * residual stresses * microstructure
Obor OECD: Materials engineering
Impakt faktor: 3.9, rok: 2023
Způsob publikování: Open access
DOI: https://doi.org/10.1016/j.aime.2024.100151
Trvalý link: https://hdl.handle.net/11104/0360941Název souboru Staženo Velikost Komentář Verze Přístup 0603586.pdf 0 14.4 MB CC Licence Vydavatelský postprint povolen - 2.0587559 - FZÚ 2025 RIV GB eng J - Článek v odborném periodiku
Stránský, Ondřej - Beránek, L. - Pathak, Sunil - Šmaus, Jan - Kopeček, Jaromír - Kaufman, Jan - Böhm, Marek - Brajer, Jan - Mocek, Tomáš - Holešovský, F.
Effects of sacrificial coating material in laser shock peening of L-PBF printed AlSi10Mg.
Virtual and Physical Prototyping. Roč. 19, č. 1 (2024), č. článku e2340656. ISSN 1745-2759. E-ISSN 1745-2767
Grant CEP: GA MŠMT(CZ) EH22_008/0004573
Institucionální podpora: RVO:68378271
Klíčová slova: laser shock peening * sacrificial coating * laser powder bed fusion * microstructure * porosity * residual stresses
Obor OECD: Optics (including laser optics and quantum optics)
Impakt faktor: 10.2, rok: 2023 ; AIS: 1.832, rok: 2023
Způsob publikování: Open access
DOI: https://doi.org/10.1080/17452759.2024.2340656
Trvalý link: https://hdl.handle.net/11104/0354710Název souboru Staženo Velikost Komentář Verze Přístup 0587559.pdf 0 2.7 MB CC Licence Vydavatelský postprint povolen - 3.0582167 - FZÚ 2024 RIV NL eng J - Článek v odborném periodiku
Stránský, O. - Beránek, L. - Pathak, Sunil - Kaufman, Jan - Böhm, Marek - Kopeček, Jaromír - Holešovský, F. - Petrášek, Š. - Hlavůňková, L. - Soukup, Z.
Porosity and microstructure of L-PBF printed AlSi10Mg thin tubes in laser shock peening.
Journal of Materials Research and Technology-JMR&T. Roč. 27, Nov. (2023), s. 1683-1695. ISSN 2238-7854. E-ISSN 2214-0697
GRANT EU: European Commission(XE) 739573 - HiLASE CoE
Výzkumná infrastruktura: CzechNanoLab II - 90251
Institucionální podpora: RVO:68378271
Klíčová slova: laser powder bed fusion * laser shock peening * porosity residual stresses * microstructure * aluminum
Obor OECD: Optics (including laser optics and quantum optics)
Impakt faktor: 6.2, rok: 2023 ; AIS: 0.884, rok: 2023
Způsob publikování: Open access
DOI: https://doi.org/10.1016/j.jmrt.2023.10.013
Trvalý link: https://hdl.handle.net/11104/0350241Název souboru Staženo Velikost Komentář Verze Přístup 0582167.pdf 0 5.1 MB CC licence Vydavatelský postprint povolen - 4.0576238 - FZÚ 2024 RIV NL eng J - Článek v odborném periodiku
Pathak, Sunil - Böhm, Marek - Kaufman, Jan - Kopeček, Jaromír - Zulic, Sanin - Stránský, Ondřej - Shukla, A. - Brajer, Jan - Beránek, L. - Radhakrisnan, J. - Rostohar, D. - Mocek, Tomáš
Surface integrity of SLM manufactured meso-size gears in laser shock peening without coating.
Journal of Manufacturing Processes. Roč. 85, Jan (2023), s. 764-773. ISSN 1526-6125. E-ISSN 2212-4616
Grant CEP: GA MŠMT(CZ) EF20_079/0017754
Grant ostatní: OP VVV - MSCA-IF IV FZU(XE) CZ.02.2.69/0.0/0.0/20_079/0017754
Institucionální podpora: RVO:68378271
Klíčová slova: laser shock peening * meso * gear * surface quality * residual stresses * microstructure
Obor OECD: Optics (including laser optics and quantum optics)
Impakt faktor: 6.1, rok: 2023 ; AIS: 0.97, rok: 2023
Způsob publikování: Open access
DOI: https://doi.org/10.1016/j.jmapro.2022.12.011
Trvalý link: https://hdl.handle.net/11104/0345814Název souboru Staženo Velikost Komentář Verze Přístup 0576238.pdf 0 13.5 MB CC Licence Vydavatelský postprint povolen - 5.0571965 - FZÚ 2024 RIV GB eng J - Článek v odborném periodiku
Pathak, Sunil - Böhm, Marek - Kaufman, Jan - Kopeček, Jaromír - Zulic, Sanin - Stránský, Ondřej - Brajer, Jan - Beránek, L. - Mocek, Tomáš
Microstructure and surface quality of SLM printed miniature helical gear in LSPwC.
Surface Engineering. Roč. 39, č. 2 (2023), s. 229-237. ISSN 0267-0844. E-ISSN 1743-2944
GRANT EU: European Commission(XE) 739573 - HiLASE CoE
Výzkumná infrastruktura: CzechNanoLab II - 90251
Institucionální podpora: RVO:68378271
Klíčová slova: laser shock peening * residual stresses * meso size gear * helical gear * microstructure * grain refinement * dislocation * surface roughness
Obor OECD: Optics (including laser optics and quantum optics)
Impakt faktor: 2.4, rok: 2023 ; AIS: 0.298, rok: 2023
Způsob publikování: Open access
DOI: https://doi.org/10.1080/02670844.2023.2207934
Trvalý link: https://hdl.handle.net/11104/0342821Název souboru Staženo Velikost Komentář Verze Přístup 0571965.pdf 0 4.3 MB CC licence Vydavatelský postprint povolen - 6.0567486 - FZÚ 2023 RIV CZ eng J - Článek v odborném periodiku
Jochcová, Dominika - Kaufman, Jan - Hauschwitz, Petr - Brajer, Jan - Vanda, Jan
Intensity distribution modulation of multiple beam interference pattern.
MM Science Journal. Roč. 2019, Dec (2019), s. 3652-3656. ISSN 1803-1269. E-ISSN 1805-0476
Grant CEP: GA MŠMT LM2015086; GA MŠMT LO1602
Institucionální podpora: RVO:68378271
Klíčová slova: direct Laser interference patterning * multiple beam interference * interference field simulation * diffractive optical element * laser microstructuring
Obor OECD: Optics (including laser optics and quantum optics)
Způsob publikování: Open access
DOI: https://doi.org/10.17973/MMSJ.2019_12_2019117
Trvalý link: https://hdl.handle.net/11104/0338735Název souboru Staženo Velikost Komentář Verze Přístup 0567486.pdf 2 1.6 MB Zveřejněno se souhlasem vydavatele Vydavatelský postprint povolen - 7.0561209 - FZÚ 2023 RIV US eng J - Článek v odborném periodiku
Špirit, Z. - Kaufman, Jan - Chocholoušek, M. - Strejcius, J.
Mechanical tests results of laser shock peening-treated austenitic steel.
Journal of Nuclear Engineering and Radiation Science. Roč. 7, č. 2 (2021), č. článku 024506. ISSN 2332-8983. E-ISSN 2332-8975
Institucionální podpora: RVO:68378271
Klíčová slova: laser shock peening * fatigue life * tensile test * stainless steel
Obor OECD: Optics (including laser optics and quantum optics)
Způsob publikování: Omezený přístup
Web výsledku:
https://doi.org/10.1115/1.4048766DOI: https://doi.org/10.1115/1.4048766
Trvalý link: https://hdl.handle.net/11104/0333894 - 8.0560496 - FZÚ 2023 RIV BR eng J - Článek v odborném periodiku
Pathak, Sunil - Zulic, Sanin - Kaufman, Jan - Kopeček, Jaromír - Stránský, Ondřej - Böhm, Marek - Brajer, Jan - Beránek, L. - Shukla, A. - Ackermann, M. - Véle, F. - Mocek, Tomáš
Post-processing of selective laser melting manufactured SS-304L by laser shock peening.
Journal of Materials Research and Technology-JMR&T. Roč. 19, Aug (2022), s. 4787-4792. ISSN 2238-7854. E-ISSN 2214-0697
Grant CEP: GA MŠMT(CZ) EF20_079/0017754
Institucionální podpora: RVO:68378271
Klíčová slova: additive manufacturing * residual stresses * laser shock peening * microstructure
Obor OECD: Optics (including laser optics and quantum optics)
Impakt faktor: 6.4, rok: 2022 ; AIS: 0.812, rok: 2022
Způsob publikování: Open access
DOI: https://doi.org/10.1016/j.jmrt.2022.07.014
Trvalý link: https://hdl.handle.net/11104/0333633Název souboru Staženo Velikost Komentář Verze Přístup 0560496.pdf 1 2.2 MB CC Licence Vydavatelský postprint povolen - 9.0558979 - FZÚ 2023 RIV GB eng J - Článek v odborném periodiku
Zulic, Sanin - Rostohar, Danijela - Kaufman, Jan - Pathak, Sunil - Kopeček, Jaromír - Böhm, Marek - Brajer, Jan - Mocek, Tomáš
Fatigue life enhancement of additive manufactured 316l stainless steel by LSP using a DPSS laser system.
Surface Engineering. Roč. 38, č. 2 (2022), s. 183-190. ISSN 0267-0844. E-ISSN 1743-2944
Grant CEP: GA MŠMT EF15_006/0000674; GA MŠMT(CZ) EF20_079/0017754
GRANT EU: European Commission(XE) 739573 - HiLASE CoE
Grant ostatní: OP VVV - HiLASE-CoE(XE) CZ.02.1.01/0.0/0.0/15_006/0000674; OP VVV - MSCA-IF IV FZU(XE) CZ.02.2.69/0.0/0.0/20_079/0017754
Institucionální podpora: RVO:68378271
Klíčová slova: laser shock peening * residual stress * fatigue * DPSS * additive manufacturing * SLM * SEM * EBSD
Obor OECD: Optics (including laser optics and quantum optics)
Impakt faktor: 2.8, rok: 2022 ; AIS: 0.334, rok: 2022
Způsob publikování: Open access
DOI: https://doi.org/10.1080/02670844.2022.2060463
Trvalý link: https://hdl.handle.net/11104/0333053Název souboru Staženo Velikost Komentář Verze Přístup 0558979.pdf 0 2.4 MB CC licence Vydavatelský postprint povolen - 10.0558196 - FZÚ 2023 RIV CH eng J - Článek v odborném periodiku
Křivková, A. - Laitl, V. - Chatzitheodoridis, E. - Petera, L. - Kubelík, P. - Knížek, A. - Saeidfirozeh, H. - Drtinová, B. - Čuba, V. - Páclík, D. - Mocek, Tomáš - Brajer, Jan - Kaufman, Jan - Divoký, Martin - Koukal, J. - Dudžák, Roman - Schmidt, N. - Boháček, Petr - Civiš, S. - Lenža, L. - Krůs, M. - Ferus, M.
Morphology of meteorite surfaces ablated by high-power lasers: review and applications.
Applied Sciences-Basel. Roč. 12, č. 10 (2022), č. článku 4869. ISSN 2076-3417. E-ISSN 2076-3417
Grant CEP: GA MŠMT(CZ) LM2018114
Institucionální podpora: RVO:68378271
Klíčová slova: meteorites * high-power laser * laser ablation * laser-matter interaction * laser-induced plasma
Obor OECD: Optics (including laser optics and quantum optics)
Impakt faktor: 2.7, rok: 2022 ; AIS: 0.414, rok: 2022
Způsob publikování: Open access
DOI: https://doi.org/10.3390/app12104869
Trvalý link: https://hdl.handle.net/11104/0333628Název souboru Staženo Velikost Komentář Verze Přístup 0558196.pdf 2 8.1 MB CC licence Vydavatelský postprint povolen